Sony LIB-81 User Manual

31

Chapter 2  Installation

When [[ENTER] to activate] 
appears, press the [ENTER] button.

The display returns to “Network”.

When you want to set the IP address, select “3.IP Address”, then press the 
[ENTER] button.

• Select “YES” to use the IP address assigned to the DHCP server. Then 

proceed to step 12.

• Select “NO” to use the fixed IP address. Then proceed to step 10.

When the “IP” setting flashes, use the V button, the v button, the [ENTER] 
button and the [CANCEL] button to set the IP Address, then press the 
[ENTER] button.

When the “Mask” setting flashes, use the V button, the v button, the 
[ENTER] button and the [CANCEL] button to set the subnet mask, then 
press the [ENTER] button.

When [[ENTER] to activate] 
appears, press the [ENTER] button.

The display returns to “Network”.

When you want to set the default gateway, select “5.Gateway”, then press 
the [ENTER] button. (However, the AIT library does not support the 
default gateway setting.)

When the “Gateway” setting flashes, use the V button, the v button, the 
[ENTER] button and the [CANCEL] button to set the IP address for the 
default gateway, then press the [ENTER] button.

When [[ENTER] to activate] 
appears, press the [ENTER] button.

The display returns to “Network”.

When you want to obtain the MAC address, select “6.MAC Information”, 
then press the [ENTER] button.

The MAC address is displayed.

Press the [CANCEL] button twice to return to the status display.

Use the V and v buttons to select 
“9. System Down”, then press the 
[ENTER] button.