Sony LIB-81 User Manual

46

Chapter 3  Basic Usage

When “[ENTER] to activate” 
appears, press the [ENTER] button.

The brightness of the LCD panel is 
now set. The display returns to the 
menu.

Press the [CANCEL] button twice to return to the status display.

Depending on your software, you can elect to activate the sequential mode in 
“Sequential Mode” of the Configuration Menu.
By activating the sequential mode, you can use the software to automatically 
instruct the library to return an ejected cartridge to its original slot and insert the 
next cartridge into the AIT drive. You can also adjust the settings so that if the 
library finds no cartridge in the next slot it inserts the next cartridge in the 
sequence into the AIT drive. It is also possible to make continuous unloading 
settings.

• You must use customized software to be able to use this function. Under 

normal circumstances, do not use the sequential mode.

• You can only make continuous unloading settings when the sequential mode 

is active.

At the status display, press the [MENU] button for 2 second.

Use the V and v buttons to select 
“5. Configuration”, then press the 
[ENTER] button.

Select “6. Sequential Mode”, then 
press the [ENTER] button.

“Sequential Mode” appears.

When the “Sequential Mode” setting blinks, use the V and v buttons to 
select “YES”, then press the [ENTER] button.

By default, this is “NO”. If you do not want use the sequential mode, leave 
this setting to “NO”.

When the “Unload Continue” setting blinks, use the V and v buttons to 
select “YES”, then press the [ENTER] button.

By default, this is “NO”. If you do not want use the continuous unloading 
function, leave this setting to “NO”.

If you do not set “Sequential Mode” in step 4 to “YES”, you cannot change 
the “Unload Continue” setting.

When “[ENTER] to activate” appears, press the [ENTER] button.

Press the [CANCEL] button twice to return to the status display.

■■■■