Sony LIB-81 User Manual

58

Chapter 4  Operating the AIT Library

If you selected “2. Multiple Mode” in step 4, perform the following 
depending on the number of open slots.

Two or more open slots
The slot moves to the next one. 
When it stops, insert another 
cartridge and press the [ENTER] 
button again. Repeat until all the 
cartridges are inserted, then press 
the [CANCEL] button.
1 Insert a cartridge and press the 

[ENTER] button.

2 The slot moves to the next. Insert 

another cartridge in the same 
manner and press the [ENTER] 
button.
When you press the [ENTER] 
button, the slot moves to the next.

3 Repeat until all the cartridges are 

inserted, and then press the 
[CANCEL] button.

Only one open slot
The element address of the front 
slot appears on the first line. 
(Nothing appears on the second 
line.)
1 Insert a cartridge and press the 

[CANCEL] button.

Do not put your fingers in the slot 
when it is moving, as this could 
result in injuries.

When “[ENTER] to activate” appears, press the [ENTER] button.

If you selected “1. Single Mode” in 
step 4, the display on the right 
appears.

If you selected “2. Multiple Mode” 
in step 4, the display on the right 
appears.

The shutter closes and the 
initialization is performed.

Keep your fingers clear of the 
shutter when it closes.

When the initialization ends, press the [CANCEL] button three times to 
return to the menu display.