Sony LBT-LX50 User Manual

Take up any slack in the tape. Otherwise the tape
may get entangled inside the tape deck and become
damaged.

The tape is very elastic. Do not frequently change
the tape operations such as play, stop, and fast-
forwarding, etc. The tape may get entangled in the
tape deck.

Clean the tape heads after every 10 hours of use.
When the tape heads become dirty

— the sound is distorted
— there is a decrease in sound level
— the sound drops out
— the tape does not erase completely
— the tape does not record

Make sure to clean the tape heads before you start
an important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.

Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of
use with a separately sold demagnetizing cassette.
For details, refer to the instructions of the
demagnetizing cassette.

If you later want to reuse the tape for recording,
cover the broken tab with adhesive tape. However,
be careful not to cover the detector slots which allow
the tape player to automatically detect the type of
tape.

Tape type: CrO

2

/Metal

           Normal

Detector slots

• Before playing, clean the CD with a cleaning cloth.

Wipe the CD from the center out.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or anti-static
spray intended for vinyl LPs.

• Do not expose the CD to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.

Use a soft cloth slightly moistened with mild
detergent solution.

To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.

Detector slots

Tab of side B

Tab of side A

Side A

Break off the
cassette tab of
side A