Sony kv-xf29m80 User Manual

25

Additional Information

If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.

• Check the antenna cable and connection

on the TV, VCR and at the wall.
(page 4)

• Display the CH PRESET menu and

select “MANUAL PROGRAM” to preset
the channel again. (page 21)

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it is

in use.

• If the sound of all the channels is noisy,

display the CH PRESET menu and
check the TV system (TV SYS) setting
(page 22), then select “AUTO
PROGRAM” to preset the channels
again. (page 24)

• If the sound of some channels is noisy,

select the channel, then  display the CH
PRESET menu and select the
appropriate TV system (TV SYS).
(page 22)

• Check the power cord, antenna and the

VCR connections.

• Press  u (power).
• Press U (main power) on the TV to turn

off the TV about five seconds, then turn
it on again.

• The connection is loose or

the cable is damaged.

• The channel presetting is

inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna direction

needs adjustment.

• Signal transmission is low.

• Broadcast signals are too

strong.

• The TV system setting or

channel presetting is
inappropriate or
incomplete.

• The power cord, antenna or

VCR is not connected.

• The TV is not turned on.