Sony kv-sw29m91 User Manual

26

Additional Information

24

–

22

22

–

–

22

22

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Display the “Channel Setup” menu and set

the “Signal Booster” to “Auto” from
“Manual Program”.

• Try using an external booster.

• Turn off or disconnect the external booster

if it is in use.

• Display the “Channel Setup” menu and set

the “Signal Booster” to “Off” from
“Manual Program”.

• Display the “Channel Setup” menu and

select the appropriate “TV System” from
“Manual Program”.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

x

If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

TV

RESET

01GB08ADV-Rus.p65

20/9/04, 11:39 AM

26

Black