Sony LBT-ZX80D User Manual

Page of 96
Displa
y
67
US
Use the buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select 
“SPECTRUM”.
The last selected spectrum setting appears 
in the display.
2
Turn OPERATION DIAL clockwise or 
counterclockwise to select the setting 
you want.
The display changes cyclically as follows:
SPECTRUM 1 
y SPECTRUM 2 y
SPECTRUM 3 
y SPECTRUM 4 y
SPECTRUM 5 
y SPECTRUM OFF
3
Press ENTER.
FST-ZX100D/LBT-ZX100D/FST-ZX80D/
LBT-ZX80D only
When X-ROUND mode is selected
1
Press AMP MENU repeatedly to select 
“X-POSITION”.
The last selected spectrum setting appears 
in the display.
2
Turn OPERATION DIAL clockwise or 
counterclockwise to select the setting 
you want.
The display changes as follows:
X-POS ON* 
y X-POS OFF
*The spectrum analyzer display will synchronize 
with the selected X-ROUND effect.
3
Press ENTER.
Use the buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select 
“DIMMER”.
The last selected dimmer setting appears in 
the display.
2
Turn OPERATION DIAL clockwise or 
counterclockwise to select the setting 
you want.
The display changes cyclically as follows:
DIMMER 1 
y DIMMER 2 y
DIMMER OFF
3
Press ENTER.
Press ILLUMINATION on the unit 
repeatedly to select the power illuminator 
you want when the system is turned on.
Each time you press the button, the power 
illuminator changes cyclically as follows:
PATTERN 1 
t PATTERN 2 t 
PATTERN 3 
t PATTERN 4 t 
PATTERN OFF
FST-ZX100D/LBT-ZX100D/
FST-ZX80D/LBT-ZX80D only 
When X-ROUND mode is selected
Press ILLUMINATION on the unit 
repeatedly to select the power illuminator 
you want.
Each time you press the button, the power 
illuminator changes as follows:
PATTERN OFF 
y X-PATTERN*
* The power illuminator will synchronize with the 
selected X-ROUND effect. 
Changing the spectrum 
analyzer display
Adjusting the brightness 
of the front panel display
Changing the power 
illuminator
continued