Sony LMD-2030W User Manual

 

2

The model and serial numbers are located at the rear. 
Record these numbers in the spaces provided below. 
Refer to these numbers whenever you call upon your 
Sony dealer regarding this product.

Model No. ____________________
Serial No. ____________________

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in 

accordance with the manufacturer's instructions.

• Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. 
If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete 
outlet.

• Protect the power cord from being walked on or 

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.

• Only use attachments/accessories specified by the 

manufacturer.

• Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury 
from tip-over.

• Unplug this apparatus during lightning storms or 

when unused for long periods of time.

• Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate 
normally, or has been dropped. 

Make sure the surface is wide enough so that this 
apparatus’s width and depth don’t exceed the surface’s 
edges.
If not, this apparatus may lean or fall over and cause an 
injury.

This symbol is intended to alert the user to 
the presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.

This symbol is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in 
the literature accompanying the 
appliance.