Sony LMD-2030W User Manual
20
Specifications
Specifications
Picture performance
LCD panel
a-Si TFT Active Matrix
Picture size
20.1 type
433 × 271 × 511 mm
(W/H/Diagonal)
(17
(W/H/Diagonal)
(17
1
/
8
× 10
3
/
4
× 20
1
/
8
inches)
Resolution
1,680 × 1,050 dots (WSXGA+)
Viewing angle
89° / 89° / 89° / 89° (typical)
Scan
Under –3 %
Over 5 %
Over 5 %
Aspect
16 : 10
Display color
16,700,000
Input/output connectors
Input
LINE A input connectors
LINE A input connectors
Y/C input
4-pin mini-DIN (1)
VIDEO input
BNC type (1), 1 Vp-p ±3 dB, negative
synchronization
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
RGB/COMPONENT input connectors BNC type (3)
RGB input
0.7 Vp-p ±3 dB, (Sync On Green,
0.3 Vp-p negative sync.)
Component input
0.7 Vp-p ±3 dB, (75 % chrominance
standard color bar signal)
AUDIO input
Phono jack (1), –5 dBu 47 kilohms or
higher
OPTION IN connector
D-sub 9-pin (1), female
OPTION AUDIO IN connector
Phono jack (1), –5 dBu 47 kilohms or
higher
External synchronized input connector
BNC type (1), 0.3 to 4 Vp-p negative
polarity binary
HDMI IN connector
HDMI (1)
PARALLEL REMOTE input connector
Parallel remote
Modular connector 8-pin (1)
Output
LINE A output connectors
LINE A output connectors
Y/C output
4-pin mini-DIN (1), Loop-through,
with 75 ohms automatic terminal
function
function
VIDEO output
BNC type (1), Loop-through, with
75 ohms automatic terminal
function
function
AUDIO output
Phono jack (1), Loop-through
RGB/COMPONENT output connectors
RGB/Component output
BNC type (3), Loop-through, with
75 ohms automatic terminal
function
function
AUDIO output
Phono jack (1), Loop-through
External synchronized output connector
BNC type (1), Loop-through, with
75 ohms automatic terminal function
Built-in speaker output
0.5 W (mono)
General
Power
AC100 – 240 V, 50/60 Hz
Power consumption
Maximum: approx. 72 W, 0.8 A – 0.4 A
Peak inrush current
(1) Power ON, current probe method: 34A
(100V), 64 A (240V)
(2) Hot switching inrush current,
measured in accordance with European
standard EN55103-1: 55 A (230V)
standard EN55103-1: 55 A (230V)
Dimensions
Approx. 493 × 408 × 264 mm
(not including the projection parts)
(19
(19
1
/
2
× 16
1
/
8
× 10
1
/
2
inches)
(w/h/d)
Mass
Approx. 9.6 kg (21 lb 3 oz)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity
30% to 85% (no condensation)
Pressure
700 to 1060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity
0% to 90%
Pressure
700 hPa to 1060 hPa
Accessories supplied AC power cord (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Warranty Card (1)
Operating Instructions (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Warranty Card (1)
Optional accessories
Mounting bracket MB-529
SDI input adaptor BKM-320D
SDI input adaptor BKM-320D
Design and specifications are subject to change without notice.
Note
Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.