Sony md walkman mz-r55 User Manual

z

You can edit your recordings by adding/
erasing track marks or labeling tracks and
MDs. Premastered MDs cannot be edited.

•Do not move or jog the recorder while “Toc

Edit”* is flashing in the display.

•You cannot edit tracks on an MD that is

record-protected. Before editing tracks,
close the tab on the side of the MD.

*TOC = Table of Contents

You can quickly erase all the tracks and
data of the MD at the same time.
Note that once a recording has been
erased, you cannot retrieve it. Be sure to
check the contents of the disc you want to
erase.

Press EDIT/ENTER on the recorder.

Press 

= or + repeatedly until

”

: Erase” flashes in the display.

Press EDIT/ENTER again.
”All Erase?” and ”Push ENTER”
appear alternately in the display.
To cancel erasing, press 

p or

T MARK.

Press EDIT/ENTER again.
”Toc Edit” flashes in the display, and
all the tracks will be erased.
When erasing is complete, ”BLANK
DISC” appears in the display.

Note that once a recording has been
erased, you cannot retrieve it. Make sure
of the track you are erasing.

Press EDIT/ENTER while playing
the track you want to erase.
”

: Name” flashes in the display,

and the recorder plays the selected
track repeatedly.

Press 

= or + repeatedly until

”

: Erase” flashes in the display.

Press EDIT/ENTER again.
”Erase OK?” and ”Push ENTER”
appear alternately in the display.
To cancel erasing, press 

p or

T MARK.

Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.

= +

= +