Sony md walkman mz-r55 User Manual
25
On the remote control
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press
To label a disc that is already in the
recorder, press
p to stop.
2
Press DISPLAY for 2 seconds or
more.
”
more.
”
: Name” flashes in the display.
3
Press
p.
The disc is ready to be labeled.
4
Turn the control to select a letter and
press
press
p to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
the cursor moves to the next input
position.
DISPLAY
2
To label a track, press EDIT/ENTER
again.
To label a disc, press
again.
To label a disc, press
= or +
repeatedly until ”
: Name”
flashes in the display, then press
EDIT/ENTER.
EDIT/ENTER.
3
Follow steps 4 to 6 of ”Labeling a disc
during stop” above.
during stop” above.
To cancel labeling, press
p or T MARK.
Note
If, while labeling a track or disc during
recording, the track or disc comes to the
end, or the next track begins, the labeling
that is input up to that point is registered
automatically.
If, while labeling a track or disc during
recording, the track or disc comes to the
end, or the next track begins, the labeling
that is input up to that point is registered
automatically.
continued
PLAY MODE
P
Control
TRACK
MARK
MARK
p
VOL +/–
Press/ Turn
P
VOL +/–
=/(•+
DISPLAY
PLAY MODE
TRACK MARK
To
Switch between capital
letters, small letters, and
marks / numbers.
letters, small letters, and
marks / numbers.
Move the cursor to the
left or right.
left or right.
Change the letter to the
one before / next one.
one before / next one.
Insert a blank space to
type in a new letter.
type in a new letter.
Delete a letter and move
back all following letters
to the left.
back all following letters
to the left.
Cancel labeling.