Sony md-cc2000 User Manual
5
MDCC-2000
6
Introduction
1
A: display (deck A)
Indicates the disc inserted in deck A or the
status of deck A as follows:
Indicates the disc inserted in deck A or the
status of deck A as follows:
BLANK: a blank disc
NO DISC: no disc
PB ONLY: a commercially available recorded
disc (for playback only)
PROTECTED: a protected disc (3)
RECORDED: a recorded disc
NO DISC: no disc
PB ONLY: a commercially available recorded
disc (for playback only)
PROTECTED: a protected disc (3)
RECORDED: a recorded disc
2
TIME display (deck A)
Indicates the recorded time at the current
location for each index item. It blinks during
time search. (18)
Indicates the recorded time at the current
location for each index item. It blinks during
time search. (18)
3
(copied) display (deck A)
Indicates that a disc digitally copied with the
Copy function is inserted. (26)
Copy function is inserted. (26)
4
INDEX counter (deck A)
Lights up when a disc is inserted.
Blinks during an index search. (17)
Lights up when a disc is inserted.
Blinks during an index search. (17)
5
END display (deck A)
This shows the end of the disc.
This shows the end of the disc.
6
Disc status display (deck A)
Indicates the status of the disc with pictures.
Indicates the status of the disc with pictures.
7
DECK A/DECK B display
Indicates various data by characters and various
error messages. (38)
Indicates various data by characters and various
error messages. (38)
8
Disc position display
Indicates the current playback/recording location
on the disc by a white box. Already recorded
parts are indicated in black. The further it is to
the right, the closer the disc is to the end.
Depending on the condition of the disc, the black
part might not reach the far right even if the disc
is full.
Indicates the current playback/recording location
on the disc by a white box. Already recorded
parts are indicated in black. The further it is to
the right, the closer the disc is to the end.
Depending on the condition of the disc, the black
part might not reach the far right even if the disc
is full.
9
DATE/TIME display
Indicates the current date and time.
Indicates the current date and time.
0
B: display (deck B)
Indicates the same contents as deck A.
Indicates the same contents as deck A.
qa
TIME display (deck B)
qs
(copied) display (deck B)
qd
Disc status display (deck B)
qf
END display (deck B)
qg
INDEX counter (deck B)
qh
REC MODE display
Indicates the recording mode (2ch/4ch) currently
selected.
Indicates the recording mode (2ch/4ch) currently
selected.
Display Window (Information screen)
1
2
3
4
5
6
7
8
9
0
qa
qs
qd
qf
qg
qh
8
Setting Up
Setting the Date and Time
1
Insert the key and set it to ON.
You will see the initial screen in a few seconds.
You will see the initial screen in a few seconds.
2
Press FUNCTION.
3
Select CALENDAR,CLK using the jog dial or the arrow
buttons, and press ENTER.
You will see the CALENDAR or CLOCK INPUT screen.
buttons, and press ENTER.
You will see the CALENDAR or CLOCK INPUT screen.
4
Select CALENDAR using the jog dial or the arrow buttons,
and press ENTER.
You will see the SET MONTH (mmm) and DAY (dd) and YEAR (yy)
screen with the name of a month blinking.
and press ENTER.
You will see the SET MONTH (mmm) and DAY (dd) and YEAR (yy)
screen with the name of a month blinking.
5
Set the month using the jog dial or J/j buttons, and
press ENTER.
You will see “01” of the day blinking.
press ENTER.
You will see “01” of the day blinking.
6
Set the day and the year in the same way as step 5.
When the year is set, the display will return to the information screen.
When the year is set, the display will return to the information screen.
1
2
3, 4, 5, 6
Setting the Date
blink
To record the date and time
etc. on MiniDiscs when you
record, be sure to set the Date
and Time.
etc. on MiniDiscs when you
record, be sure to set the Date
and Time.
Note
You cannot use the K/k buttons
when setting the month, day and
year.
You cannot use the K/k buttons
when setting the month, day and
year.
9
Setting Up
1
Carry out steps 2 and 3 of “Setting the Date”.
You will see the CALENDER or CLOCK INPUT screen.
You will see the CALENDER or CLOCK INPUT screen.
2
Select CLOCK using the jog dial or the arrow buttons, and
press ENTER.
You will see the SET HOUR (hh) and MINUTE (mm) screen with the
hours and AM/PM blinking.
press ENTER.
You will see the SET HOUR (hh) and MINUTE (mm) screen with the
hours and AM/PM blinking.
3
Set the hour using the jog dial or J/j buttons, and press
ENTER.
You will see the minutes blinking.
ENTER.
You will see the minutes blinking.
4
Set the minutes in the same way as step 3.
The display will return to the information screen and the clock will
start.
The display will return to the information screen and the clock will
start.
blink
Note
You cannot use the K/k buttons
when setting the hour and minute.
You cannot use the K/k buttons
when setting the hour and minute.
Setting the Time
2, 3, 4
5
Introduction
Left side
Rear
ra
CONTROL UNIT connector (32)
rs
TRANSCRIBE selector (33)
rd
REMOTE jack (15)
rf
EAR jack (16)
rg
PC connector (RS-232C type)
rh
DISPLAY connector
Used for connection of an external
counter unit.
Used for connection of an external
counter unit.
rj
ADA jack
Allows the unit to be connected to a
separately purchased amplifier
system.
Allows the unit to be connected to a
separately purchased amplifier
system.
rk
PA (public address) jack (30)
rl
LINE OUT jacks
t;
LINE IN jacks
ta
DC IN 12V
ts
Microphone connectors
(Canon XLR-3-31 type)
(Canon XLR-3-31 type)