Sony MDS-W1 User Manual

Basic Operations

With the
label side up

With the arrow pointing this way

Dubbing an MD

(MD Synchro-Recording)

Press

1/u.

The STANDBY indicator turns off.

Insert a recorded MD into deck A and a recordable MD into
deck B.

If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.

Select the desired dubbing method.
Check the following table, then go to Step 4.

To perform

Make sure that

All Tracks Dubbing

the tracks are not selected while deck A
is stopped.

One Track Dubbing

the track is selected while deck A is
playing, pausing or stopped.

Program Dubbing

the Program Play mode in SET UP
menu “PLAY MODE” is selected while
deck A is stopped (page 29).

(Continued)

The MD Synchro-Recording
Function lets you dub an MD in
deck A to an MD in deck B.

When you want to dub from
deck B to deck A, see
“Recording on an MD” on
page 7. In this case, the MD is
dubbed by normal recording
instead of MD Synchro-
Recording.

There are three methods for
dubbing an MD

• You can copy all tracks from

deck A to deck B.
(All Tracks Dubbing)

• You can copy a single track

from deck A to deck B.
(One Track Dubbing)

• You can copy only the

programed tracks from deck
A to deck B.
(Program Dubbing)

Notes

• When you copy all tracks, use a

recordable MD that has enough
time remaining to record all the
tracks on deck A.

• The deck may not mark track

numbers for extremely short
tracks.

• You cannot dub an MD when the

RELAY indicator is on. Press
RELAY to turn off the indicator
before starting operations.

PHONES

EJECT

STANDBY

PHONE LEVEL

OUTPUT

REC

)

PUSH ENTER

CLEAR

REC

)

≠

AMS

YES

DISPLAY

A-INPUT

A TIME/CHAR

TIMER

B-INPUT

B TIME/CHAR

MENU/NO

≠

AMS

YES

MENU/NO

RELAY

MD SYNC