Sony MDR-DS1000 User Manual
Preparation
7
GB
Rear Panel of the Processor
DC IN9V
DIGITAL IN
LINE IN
ATT
0dB
-8dB
1
ATT (attenuator) switch
Set this switch to “0 dB” if the volume is
too low for analogue input. Normally, this
switch should be set to “–8 dB.”
too low for analogue input. Normally, this
switch should be set to “–8 dB.”
2
LINE IN jack
(See page 9 for details.)
(See page 9 for details.)
Connect the audio output jacks on an
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
audio or video component (sold
separately), such as a video cassette
player or TV, to these jacks.
3
DIGITAL IN jack
(See page 8 for details.)
(See page 8 for details.)
Connect a DVD device or other digital
component (sold separately) to this jack.
component (sold separately) to this jack.
4
DC IN 9V jack
Connect the supplied AC power adaptor
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)
to this jack. (Be sure to use the supplied
AC power adaptor. Using products with a
different plug polarity or other
characteristics can cause a malfunction.)