Sony MDS-JB940 User Manual
29
GB
Tips for recording from MDs to tape
Pla
y
ing
M
D
D
s
Tips for recording from
MDs to tape
MDs to tape
The MD deck can be set to automatically insert a three-
second blank between tracks during play. This function is
useful when you’re recording from an MD to an analog
tape. The three-second blank enables you to use the Multi-
AMS function later to locate the beginning of tracks on
the tape.
second blank between tracks during play. This function is
useful when you’re recording from an MD to an analog
tape. The three-second blank enables you to use the Multi-
AMS function later to locate the beginning of tracks on
the tape.
1
While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until
“Auto Off” appears, then press AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) to select
the setting, then press AMS or YES.
4
Press MENU/NO.
z
You can use the remote to turn Auto Space on or off
While the deck is stopped, press A.SPACE repeatedly until
“Auto Space” or “Auto Off” appears in the display.
“Auto Space” or “Auto Off” appears in the display.
z
When you turn on Auto Space
“Auto Space” appears when the deck is inserting a blank
between tracks.
between tracks.
Notes
•
If you select “Auto Space” and record a selection containing
multiple track numbers (for example, a medley or symphony),
blank spaces will be created on the tape between the various
sections.
multiple track numbers (for example, a medley or symphony),
blank spaces will be created on the tape between the various
sections.
•
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting (“Auto Space” or “Auto Off”)
and recall it the next time you turn on the deck.
deck will store the last setting (“Auto Space” or “Auto Off”)
and recall it the next time you turn on the deck.
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
to give you time to locate the next track to be recorded.
1
While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until
“Auto Off” appears, then press AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) to select
the setting, then press AMS or YES.
4
Press MENU/NO.
To resume play after pausing
Press
H.
z
You can use the remote to turn Auto Pause on or off
While the deck is stopped, press A.SPACE repeatedly until
“Auto Pause” or “Auto Off” appears in the display.
“Auto Pause” or “Auto Off” appears in the display.
z
When you turn on Auto Pause
“Auto Pause” appears during pause and disappears when the
deck resumes play.
deck resumes play.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting (“Auto Pause” or “Auto Off”) and
recall it the next time you turn on the deck.
deck will store the last setting (“Auto Pause” or “Auto Off”) and
recall it the next time you turn on the deck.
Inserting blanks between tracks during
play (Auto Space)
play (Auto Space)
To
Select
Turn on Auto Space
Auto Space
Turn off Auto Space
Auto Off (factory setting)
Pausing after each track (Auto Pause)
MENU/NO
YES
AMS
Z
To
Select
Turn on Auto Pause
Auto Pause
Turn off Auto Pause
Auto Off (factory setting)
Z