Sony MDR IF8000 User Manual
Operating Instructions
Mode d’emploi
Manual de instrucciones
Sony Corporation © 2001 Printed in Korea
MDR-IF8000
3-238-078-12(1)
Cordless Stereo
Headphones
Headphones
The Separately sold processor is necessary
The headphones cannot be used alone.
Use the separately sold Sony Digital Surround
Headphone System MDR-DS8000.
The headphones cannot be used alone.
Use the separately sold Sony Digital Surround
Headphone System MDR-DS8000.
The validity of the CE marking is restricted to only
those countries where it is legally enforced, mainly in
the countries EEA (European Economic Area).
those countries where it is legally enforced, mainly in
the countries EEA (European Economic Area).
Setting up the
headphones
headphones
The supplied rechargeable batteries should be charged
before using them for the first time.
Please refer to the manual of MDR-DS8000 for more
details.
before using them for the first time.
Please refer to the manual of MDR-DS8000 for more
details.
1
Open the battery compartment lid on top of
the left housing.
the left housing.
2
Insert two R6 (size AA) batteries.
3
Close the battery compartment lid.
Battery life
*
Usage time stated above may vary according to the
temperature or conditions of use.
temperature or conditions of use.
Note
Manganese batteries cannot be used with this unit.
Manganese batteries cannot be used with this unit.
When to replace the battery
Replace the batteries with new ones when the
POWER indicator on the right side of the headphones
dims, or distortion occurs and hissing noise increases.
Replace the batteries with new ones when the
POWER indicator on the right side of the headphones
dims, or distortion occurs and hissing noise increases.
If the battery compartment lid comes off
the headphones
As shown in the illustration, align A with A, and B
with B, reattach, and then slide the cover in place.
the headphones
As shown in the illustration, align A with A, and B
with B, reattach, and then slide the cover in place.
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
expose the unit to rain or moisture.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
filled with liquids, such as vases, on the apparatus.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Refer servicing to qualified personnel only.
For the customers in the U.S.A.
Owner’s Record
The model number is located on the right inner side of
the headband. The serial number is located at the
inner side of the battery compartment.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony
dealer regarding this product.
the headband. The serial number is located at the
inner side of the battery compartment.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. MDR-IF8000
Serial No.
Serial No.
NOTICE FOR THE CUSTOMERS IN THE U.S.A.
NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
POWER
indicator
indicator
Infrared rays receptor
Battery Type
Sony R6(size AA) rechargeable
nickel-metal hydride batteries
(NH-AA: supplied)
Sony alkaline battery LR6 (SG)
Sony R6(size AA) rechargeable
nickel-metal hydride batteries
(NH-AA: supplied)
Sony alkaline battery LR6 (SG)
Usage time
Approx. 7 hours
Approx. 7 hours
*
(when fully
charged)
Approx. 7 hours
charged)
Approx. 7 hours
*
(Suite au verso m)
English
Insert the #
side first
side first
Self-adjusting band
Raise the
volume
volume
Lower the
volume
volume
Commencez
par insérer
le côté #
par insérer
le côté #
Specifications
General
Modulation System
Modulation System
DQPSK
Secondary carrier wave frequency
4.5 MHz
Playback frequency range
12 – 24,000 Hz
Power requirements
Rechargeable nickel-metal hydride
batteries (supplied or sold separately) or
R6 (size AA) alkaline batteries
batteries (supplied or sold separately) or
R6 (size AA) alkaline batteries
Mass
Approx. 350 g (10 oz) (including the
supplied rechargeable nickel-metal
hydride batteries)
supplied rechargeable nickel-metal
hydride batteries)
Supplied accessories
Rechargeable nickel-metal hydride batteries
NH-AA(1,700 mAh) (2)
Operating Instructions (1)
NH-AA(1,700 mAh) (2)
Operating Instructions (1)
Design and specifications are subject to change
without notice.
without notice.
Listening to a
programme
programme
If you use the MDR-DS8000, read the manual for the
MDR-DS8000 too.
MDR-DS8000 too.
1
Turn on the component connected to the
processor.
processor.
2
Press POWER to turn on the processor.
3
Put on the headphones.
The POWER indicator lights red, and the
headphones automatically turn on.
The POWER indicator lights red, and the
headphones automatically turn on.
4
Adjust the volume.
5
Set the head tracking function to ON.
(When the output mode of the processor is
set to “VIRTUAL FRONT” or “VIRTUAL
SURROUND”)
(When the output mode of the processor is
set to “VIRTUAL FRONT” or “VIRTUAL
SURROUND”)
Face the source (for example, your TV) and switch the
HEAD TRACKING switch to ON. Wait for 2 seconds
without moving.
Do not move your head until the head tracking system
is stabilized. No sound is output for this period.
After the head tracking system stabilizes, playback
sound can be heard. After this, even if you turn your
head in any direction, the sound will be heard as if
from the front.
HEAD TRACKING switch to ON. Wait for 2 seconds
without moving.
Do not move your head until the head tracking system
is stabilized. No sound is output for this period.
After the head tracking system stabilizes, playback
sound can be heard. After this, even if you turn your
head in any direction, the sound will be heard as if
from the front.
Notes
• Always wear the headphones vertically so that
• Always wear the headphones vertically so that
the head tracking system will be stable.
• Whenever the HEAD TRACKING switch is set
to ON, and whenever you put on the
headphones with its power on, always wait for 2
seconds without moving your head as the head
tracking system newly stabilizes each time.
headphones with its power on, always wait for 2
seconds without moving your head as the head
tracking system newly stabilizes each time.
• If the sound from the headphones (while facing
your TV) seems to be different from the
actual direction of your TV, face forwards and
press the RESET button on the headphones.
actual direction of your TV, face forwards and
press the RESET button on the headphones.
The headphones automatically turn off
when they are taken off
— Auto Power On/Off Function
When not in use, be careful not to hang the
headphones in such a way as to activate the Auto
Power On function, as this will consume battery
power.
when they are taken off
— Auto Power On/Off Function
When not in use, be careful not to hang the
headphones in such a way as to activate the Auto
Power On function, as this will consume battery
power.
To check the remaining battery power
Pull up the self-adjusting band and check the POWER
indicator. The batteries are still serviceable when the
POWER indicator lights red.
Charge the rechargeable batteries or use new alkaline
batteries if the POWER indicator flashes and an
intermittent beep sound is heard from the
headphones.
Pull up the self-adjusting band and check the POWER
indicator. The batteries are still serviceable when the
POWER indicator lights red.
Charge the rechargeable batteries or use new alkaline
batteries if the POWER indicator flashes and an
intermittent beep sound is heard from the
headphones.
If no sound is heard from the headphones
A short beep sound is heard repeatedly and the
Muting Function is automatically activated if the
sound output from the headphones is cut off when the
headphones are outside the infrared transmission
area, or when the infrared signals are interrupted. The
Muting Function is automatically cancelled when you
get closer to the processor or there is no longer
anything in the way of the infrared signals.
A short beep sound is heard repeatedly and the
Muting Function is automatically activated if the
sound output from the headphones is cut off when the
headphones are outside the infrared transmission
area, or when the infrared signals are interrupted. The
Muting Function is automatically cancelled when you
get closer to the processor or there is no longer
anything in the way of the infrared signals.
Precautions
On safety
• Do not drop, hit, or otherwise expose the processor
• Do not drop, hit, or otherwise expose the processor
or headphones to strong shocks of any kind. This
could damage the product.
could damage the product.
• Do not disassemble or attempt to open any parts
of the system.
Do not place the system in any of the
following locations.
• Location exposed to direct sunlight, near a heater, or
following locations.
• Location exposed to direct sunlight, near a heater, or
other extremely high-temperature location
• Bathroom or other high-humidity locations
On headphones
Act considerately
When the volume is too high, the sound leaks
outside the headphones. Be careful not to raise the
volume too high that it bothers people around you.
There is a tendency to raise the volume when
using in noisy places. However, the volume should
be kept at a level where you can respond when
called while listening to the headphones.
When the volume is too high, the sound leaks
outside the headphones. Be careful not to raise the
volume too high that it bothers people around you.
There is a tendency to raise the volume when
using in noisy places. However, the volume should
be kept at a level where you can respond when
called while listening to the headphones.
On ear pads
The ear pads are replaceable. Replace them when
they are worn out. To replace the ear pads, consult
your nearest Sony dealer.
The ear pads are replaceable. Replace them when
they are worn out. To replace the ear pads, consult
your nearest Sony dealer.
Troubleshooting
Check and try the suggestions below before you bring
your headphones to a repair service. Should any
problem persist, consult your nearest Sony dealer.
your headphones to a repair service. Should any
problem persist, consult your nearest Sony dealer.
No sound
, Check the connection between the processor
and the AV component.
, Turn on the AV component connected to the
processor, and start the programme (playback).
, If you connect the processor to an AV
component using the headphone jacks, raise
the volume level on the connected AV
component.
the volume level on the connected AV
component.
, Raise the headphone volume.
, The batteries of the headphones are completely
, The batteries of the headphones are completely
exhausted.
• Pull up the self-adjusting band and if the
• Pull up the self-adjusting band and if the
POWER indicator is turned off, charge the
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
turned off, take the unit to your nearest Sony
dealer.
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
turned off, take the unit to your nearest Sony
dealer.
, The head tracking function does not work
correctly.
• When the HEAD TRACKING switch is set to
• When the HEAD TRACKING switch is set to
ON after putting the headphones on your
head, or when you put them on with the
HEAD TRACKING switch ON, wait for 2
seconds without moving your head. If you
hear no sound even after trying this, take off
the headphones and then, put them on again.
head, or when you put them on with the
HEAD TRACKING switch ON, wait for 2
seconds without moving your head. If you
hear no sound even after trying this, take off
the headphones and then, put them on again.
Distorted sound
, If you connect the processor to an AV
component using the headphone jacks, lower
the volume level on the connected AV
component.
the volume level on the connected AV
component.
Low sound
, If you connect the processor to an AV
component using the headphone jacks, raise
the volume level on the connected AV
component.
the volume level on the connected AV
component.
, Raise the headphone volume.
Short beep sound is heard.
, The headphones cannot receive infrared rays
from the processor.
• Turn on the processor.
• Check the connection between the processor
• Turn on the processor.
• Check the connection between the processor
and the AC power adaptor, between the AC
power adaptor and the AC power socket.
power adaptor and the AC power socket.
• Check if there is an obstacle between the
processor and the headphones.
• Use the headphones nearer to the processor.
• Change the position or angle of the processor.
• Check if your hand or hair covers the
• Change the position or angle of the processor.
• Check if your hand or hair covers the
infrared signal sensor of the headphones.
• If you use the headphones near a window
exposed to direct sunlight, draw a curtain or a
blind to block the sunlight. Or use the
headphones where you are not exposed to the
direct sunlight.
blind to block the sunlight. Or use the
headphones where you are not exposed to the
direct sunlight.
• If you use the headphones near a plasma
display panel, move away from it.
Long beep sound is heard.
, The batteries of the headphones are exhausted.
Pull up the self-adjusting band and if the
POWER indicator is flashing, charge the
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
flashing and beep sound is still heard, take the
unit to your nearest Sony dealer.
POWER indicator is flashing, charge the
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
flashing and beep sound is still heard, take the
unit to your nearest Sony dealer.
The sound from the headphones seems to
be different from the actual direction of
your TV.
be different from the actual direction of
your TV.
, Face forward (e.g.to your TV) and press the
RESET button on the headphones.
AVERTISSEMENT
Afin d’éviter tout risque d’incendie ou
d’électrocution, ne pas exposer cet
appareil à la pluie ou à l’humidité.
d’électrocution, ne pas exposer cet
appareil à la pluie ou à l’humidité.
Pour éviter tout risque d’incendie ou d’électrocution,
ne posez pas de récipients remplis d’eau (p. ex. des
vases) sur l’appareil.
ne posez pas de récipients remplis d’eau (p. ex. des
vases) sur l’appareil.
Afin d’écarter tout risque d’électrocution, ne pas
ouvrir le boîtier. Ne confier l’entretien de l’appareil
qu’à un personnel qualifié.
ouvrir le boîtier. Ne confier l’entretien de l’appareil
qu’à un personnel qualifié.
Préparation du casque
Les piles rechargeables fournies doivent être chargées
avant leur première utilisation.
Veuillez vous reporter au mode d’emploi du MDR-
DS8000 pour obtenir plus d’informations.
avant leur première utilisation.
Veuillez vous reporter au mode d’emploi du MDR-
DS8000 pour obtenir plus d’informations.
1
Ouvrez le couvercle du logement des piles
sur le haut du boîtier gauche.
sur le haut du boîtier gauche.
2
Insérez deux piles R6 (format AA).
3
Fermez le couvercle du logement des piles.
Durée d’utilisation des piles
* La durée d’utilisation indiquée ci-dessus peut varier
selon la température ou les autres conditions
d’utilisation.
d’utilisation.
Remarque
N’utilisez pas de piles au manganèse dans cet
appareil.
N’utilisez pas de piles au manganèse dans cet
appareil.
Remplacement des piles
Remplacez les piles par des piles neuves lorsque le
témoin POWER sur la droite du casque devient
sombre ou lorsque vous constatez des distorsions et
que et le sifflement augmente.
Remplacez les piles par des piles neuves lorsque le
témoin POWER sur la droite du casque devient
sombre ou lorsque vous constatez des distorsions et
que et le sifflement augmente.
Réinstallation du couvercle du logement
des piles si celui-ci se détache
Comme indiqué sur le schéma ci-dessous, alignez A
avec A et B avec B, refixez puis faites glisser le
couvercle pour le remettre en place.
des piles si celui-ci se détache
Comme indiqué sur le schéma ci-dessous, alignez A
avec A et B avec B, refixez puis faites glisser le
couvercle pour le remettre en place.
Bienvenue!
Nous vous félicitons pour l’achat de ce casque stéréo à
infrarouges Sony MDR-IF8000. Avant la mise en
service de cet appareil, prière de lire attentivement ce
mode d’emploi et de le conserver pour toute référence
ultérieure.
Cet appareil offre, entre autres, les fonctions
suivantes:
• Casque d’écoute sans fil utilisant un système de
infrarouges Sony MDR-IF8000. Avant la mise en
service de cet appareil, prière de lire attentivement ce
mode d’emploi et de le conserver pour toute référence
ultérieure.
Cet appareil offre, entre autres, les fonctions
suivantes:
• Casque d’écoute sans fil utilisant un système de
transmission numérique à infrarouges dont la
qualité sonore égale celle des disques compacts. Ce
casque isole des bruits extérieurs et des interférences
(transmission non compressée).
qualité sonore égale celle des disques compacts. Ce
casque isole des bruits extérieurs et des interférences
(transmission non compressée).
• Afin d’offrir un son plus réaliste, un système de
détection des mouvements de la tête est intégré au
casque.
casque.
• Mécanisme auto-ajustable qui évite à l’utilisateur
d’avoir à régler la taille du serre-tête.
• Fonction de mise sous tension et hors tension
automatique : le casque se met automatiquement
sous tension lorsqu’il est posé sur la tête et hors
tension lorsqu’il est retiré.
sous tension lorsqu’il est posé sur la tête et hors
tension lorsqu’il est retiré.
• Bouton VOL permettant de régler le volume droit et
gauche du casque.
• Casque d’écoute alimenté avec des piles
rechargeables nickel-hydrure métallique (fournies et
vendues séparément) ou des piles alcalines R6 de
taille AA (vendues séparément).
vendues séparément) ou des piles alcalines R6 de
taille AA (vendues séparément).
Aperçu
Le MDR-DS8000 est un système de casque d’écoute
ambiophonique numérique utilisant la transmission
infrarouges numérique.
Vous pouvez profiter des avantages d’un son
ambiophonique multicanal (le son “surround”) avec
ce casque d’écoute en raccordant tout simplement le
processeur ambiophonique numérique sur un lecteur
de DVD, un téléviseur numérique, un récepteur de
diffusion numérique par satellite, etc., à l’aide du
câble de raccordement numérique optique fourni.
Le MDR-DS8000 est un système de casque d’écoute
ambiophonique numérique utilisant la transmission
infrarouges numérique.
Vous pouvez profiter des avantages d’un son
ambiophonique multicanal (le son “surround”) avec
ce casque d’écoute en raccordant tout simplement le
processeur ambiophonique numérique sur un lecteur
de DVD, un téléviseur numérique, un récepteur de
diffusion numérique par satellite, etc., à l’aide du
câble de raccordement numérique optique fourni.
Le processeur vendu séparément est
nécessaire
Le casque ne peut pas être utilisé seul.
Utilisez le système de casque ambiophonique
numérique Sony MDR-DS8000 vendu séparément.
nécessaire
Le casque ne peut pas être utilisé seul.
Utilisez le système de casque ambiophonique
numérique Sony MDR-DS8000 vendu séparément.
La validité du marquage CE est limitée uniquement
aux pays dans lesquels il fait force de loi, c’est-à-dire
principalement dans les pays de I’EEE (Espace
économique européen).
aux pays dans lesquels il fait force de loi, c’est-à-dire
principalement dans les pays de I’EEE (Espace
économique européen).
RECYCLAGE DES ACCUMULATEURS À
HYDRURE MÉTALLIQUE DE NICKEL
HYDRURE MÉTALLIQUE DE NICKEL
Les accumulateurs à hydrure
métallique de nickel sont
recyclables.
Vous pouvez contribuer à
préserver l’environnement en
rapportant les piles usées dans
un point de collection et
recyclage le plus proche.
métallique de nickel sont
recyclables.
Vous pouvez contribuer à
préserver l’environnement en
rapportant les piles usées dans
un point de collection et
recyclage le plus proche.
Pour plus d’informations sur le recyclage des
accumulateurs, téléphonez
le numéro gratuit 1-800-822-8837 (Etats-Unis et Canada
uniquement), ou visitez http://www.rbrc.org/
accumulateurs, téléphonez
le numéro gratuit 1-800-822-8837 (Etats-Unis et Canada
uniquement), ou visitez http://www.rbrc.org/
Avertissment:
Ne pas utilliser des accumulateurs à hydrure
métallique de nickel qui sont endommagées ou qui
fuient.
Ne pas utilliser des accumulateurs à hydrure
métallique de nickel qui sont endommagées ou qui
fuient.
Type de pile
Piles rechargeables au
nickel-hydrure métallique
Sony R6 de format AA
(batteries NH-AA: fournies)
Pile alcaline LR6 (SG) de Sony
Piles rechargeables au
nickel-hydrure métallique
Sony R6 de format AA
(batteries NH-AA: fournies)
Pile alcaline LR6 (SG) de Sony
Durée d’utilisation
Environ 7 heures*
(complètement chargées)
Environ 7 heures*
(complètement chargées)
Environ 7 heures*
RECYCLING NICKEL METAL HYDRIDE
BATTERIES
BATTERIES
Nickel Metal Hydride batteries
are recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to
the collection and recycling
location nearest you.
are recyclable.
You can help preserve our
environment by returning your
used rechargeable batteries to
the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution:
Do not handle damaged or leaking Nickel Metal
Hydride batteries.
Do not handle damaged or leaking Nickel Metal
Hydride batteries.
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
not expressly approved in this manual could void
your authority to operate this equipment.
Welcome!
Thank you for purchasing the Sony
MDR-IF8000 Cordless Stereo Headphones. Before
operating the unit, please read this manual
thoroughly and retain it for future reference.
Some features are:
• Cordless headphones using a digital infrared
MDR-IF8000 Cordless Stereo Headphones. Before
operating the unit, please read this manual
thoroughly and retain it for future reference.
Some features are:
• Cordless headphones using a digital infrared
transmission system which provides the same sound
quality as compact discs, resistant to external noise
and interference. (uncompressed transmission)
quality as compact discs, resistant to external noise
and interference. (uncompressed transmission)
• Equipped with the head tracking system in the
headphones to create more realistic sound.
• Self-adjusting mechanism eliminating the need for
headband adjustment.
• Auto Power On/Off Function to automatically turn
on the headphones when they are put on and to turn
them off when they are taken off.
them off when they are taken off.
• VOL control for adjusting both the right and left
volume of the headphones.
• Rechargeable nickel-metal hydride batteries
(supplied and sold separately) or R6 (size AA)
alkaline batteries (sold separately) can be used to
power the headphones.
alkaline batteries (sold separately) can be used to
power the headphones.
Overview
The MDR-DS8000 is a digital surround headphone
system using digital infrared transmission.
You can enjoy multichannel surround sound with
headphones by simply connecting the digital
surround processor to a DVD player or a Digital TV, a
Digital Broadcasting Satellite Receiver, etc., with the
supplied optical digital connecting cable.
The MDR-DS8000 is a digital surround headphone
system using digital infrared transmission.
You can enjoy multichannel surround sound with
headphones by simply connecting the digital
surround processor to a DVD player or a Digital TV, a
Digital Broadcasting Satellite Receiver, etc., with the
supplied optical digital connecting cable.
Français