Sony mds-lsa1 User Manual
12
GB
Recording on
MDs
MDs
This chapter explains the various
ways to record on an MD, as well as
how to mark track numbers and
perform synchro-recording with other
components. See also “System
Limitations” on page 41 before
recording.
ways to record on an MD, as well as
how to mark track numbers and
perform synchro-recording with other
components. See also “System
Limitations” on page 41 before
recording.
Recording on an MD
The operations for normal recording are explained below.
If the MD has recorded material on it, the deck will
automatically start recording from the end of the recorded
portion.
If the MD has recorded material on it, the deck will
automatically start recording from the end of the recorded
portion.
?/1
INPUT
REC z
?/1
x
A
A
HX
.
>
./>
z
x
1
Press ~/1 to turn on the deck.
The STANDBY indicator turns off.
The STANDBY indicator turns off.
2
If the receiver is not turned off, turn it on and turn
on the programme source, and then select the
source kn the receiver.
on the programme source, and then select the
source kn the receiver.
3
Insert a recordable MD.
4
Press INPUT repeatedly until the name of the
programme source that you want to record from
appears.
If the programme source you want does not appear,
see page 13.
programme source that you want to record from
appears.
If the programme source you want does not appear,
see page 13.
5
If necessary, select the recording mode.
For details, see “Recording for Long Times” on page
15.
For details, see “Recording for Long Times” on page
15.
6
If necessary, locate the point on the MD to start
recording from.
If you want to record on a new MD or start recording
from the end of the recorded portion, go to step 7.
recording from.
If you want to record on a new MD or start recording
from the end of the recorded portion, go to step 7.
To record over from the beginning of an existing MD
track
Press ./> repeatedly until the number of the
track to be recorded over appears.
track
Press ./> repeatedly until the number of the
track to be recorded over appears.
To record over from the middle of an MD track
Press ./> repeatedly until the number of the
track to be recorded over appears, then press HX (or
N) to start playback. Press HX again (or press X)
at the point you want to start recording from.
Press ./> repeatedly until the number of the
track to be recorded over appears, then press HX (or
N) to start playback. Press HX again (or press X)
at the point you want to start recording from.
7
Press REC z.
The deck changes to recording pause.
The deck changes to recording pause.
8
If necessary, adjust the recording level.
For details, see “Adjusting the Recording Level” on
page 16.
For details, see “Adjusting the Recording Level” on
page 16.
9
Press HX (or press N or X).
Recording starts.
Recording starts.
10
Start playing the programme source.