Sony MDX-C800REC User Manual
25
5
Press (ENTER) to mark the dividing
point.
The unit repeatedly plays the next few
seconds after the marked point.
point.
The unit repeatedly plays the next few
seconds after the marked point.
6
Press either side of (SEEK/AMS) to fine-
tune the dividing point.
tune the dividing point.
7
While monitoring the track, press
(ENTER) at the point where you want to
divide.
“Complete!” appears, and the selected track
is divided.
(ENTER) at the point where you want to
divide.
“Complete!” appears, and the selected track
is divided.
8
To continue dividing tracks, repeat steps
4 to 7.
4 to 7.
9
Press (MENU) twice.
To cancel the dividing procedure altogether,
press (MENU) twice anywhere before step 7.
press (MENU) twice anywhere before step 7.
Notes
• The name applied to the original track will
• The name applied to the original track will
become the label for the first new track of the
divided track, and the second one will not be
labeled.
divided track, and the second one will not be
labeled.
• “Impossible” appears if the unit cannot divide a
track any more because the MD has been edited
too many times. This is due to the system
limitation of MDs and is not a malfunction of the
unit.
too many times. This is due to the system
limitation of MDs and is not a malfunction of the
unit.
Tip
To combine the divided tracks again, use the
Combine function (see page 25).
To combine the divided tracks again, use the
Combine function (see page 25).
Combining recorded
tracks
tracks
— Combine function
This function lets you put several tracks or
several independently recorded portions
together into a single track. The total number
of tracks decreases by one, and all subsequent
tracks are renumbered.
several independently recorded portions
together into a single track. The total number
of tracks decreases by one, and all subsequent
tracks are renumbered.
1
1
2
2
4
3
3
Track
number
number
Original
tracks
tracks
Combine
Combine tracks B
and C.
and C.
Example: Combining tracks B and C.
1
While playing the MD you want to edit,
press (MENU).
press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until “Combine” appears.
repeatedly until “Combine” appears.
3
Press (ENTER).
4
Press either side of (SEEK/AMS)
repeatedly to select the set of tracks you
want to combine.
repeatedly to select the set of tracks you
want to combine.
5
Press (ENTER) to combine the tracks.
“Complete!” appears, and the selected
tracks are combined.
“Complete!” appears, and the selected
tracks are combined.
6
To continue combining tracks, repeat
steps 4 and 5.
steps 4 and 5.
7
Press (MENU) twice.
To cancel the combining procedure, press
(MENU) twice anywhere before step 5.
(MENU) twice anywhere before step 5.
Notes
• The name applied to the first of the original
• The name applied to the first of the original
tracks will be labeled on the combined track.
• “Impossible” appears if the unit cannot combine
the tracks because the MD has been edited too
many times. This is due to the system limitation
of MDs and is not a malfunction of the unit.
many times. This is due to the system limitation
of MDs and is not a malfunction of the unit.
Selected track Nos.