Sony mds-jb730 User Manual

– 20 –

Each time the 

[DISPLAY/CHAR]

 button is pressed, the display changes in the following order.

1. Mode display
Displays “TEMP ADJUS”, “CPLAYMODE”, etc.

2. Error rate display
Displays the error rate in the following way.

C =  

ππππ AD = ππ

C = Indicates the C1 error.
AD = Indicates ADER.

3. Address display
The address is displayed as follows. (MO: recordable disc, CD: playback only disc)
Press the 

[SCROLL]

 button to switches between the groove display and pit display.

h =  

ππππ s = ππππ (MO pit and CD)

h =  

ππππ a = ππππ (MO groove)

h = Indicates the header address.
s = Indicates the SUBQ address.
a = Indicates the ADIP address.

 “–” is displayed when servo is not imposed.

4. Auto gain display (Not used in servicing)
The auto gain is displayed as follows.
AG = 

ππ/ππ[ ππ

5. Detrack check display (Not used in servicing)
The detrack is displayed as follows.
ADR = 

πππππππ

6. IVR display (Not used in servicing)
The IVR is displayed as follows.
[

ππ][ππ][ππ

Contents

Sets continuous playback when pressed in the STOP state. When pressed during continuous playback, the tracking servo
turns ON/OFF.

Stops continuous playback and continuous recording.

The sled moves to the outer circumference only when this is pressed.

The sled moves to the inner circumference only when this is pressed.

Switches between the pit and groove modes when pressed.

Switches the spindle servo mode (CLV-S 

˜ CLV-A).

Switches the displayed contents each time the button is pressed

Ejects the disc

Releases the test mode

Function

 

·

p
)
0
SCROLL

PLAY MODE

DISPLAY/CHAR

EJECT 

§

REPEAT

Mode display

Error rate display

Address display

Auto gain display 

(Not used in servicing)

Detrack check display 

(Not used in servicing)

IVR display 

(Not used in servicing)