Sony mds-e11 User Manual
15
Recording on MDs
Recording Using a Timer
A commercially available timer connected to the
recorder allows it to start or stop recording at a
preappointed time. For additional information, refer to
the information manual for the timer.
recorder allows it to start or stop recording at a
preappointed time. For additional information, refer to
the information manual for the timer.
1
Turn on the timer.
2
Perform steps 1 to 5 in “Recording on an MD”
(see page 6).
(see page 6).
3
Choose “Timer REC” from the Setup Menu.
1. While the recorder is stopped, press EDIT/NO
1. While the recorder is stopped, press EDIT/NO
twice to display “Setup Menu.”
2. Turn AMS until “Timer” appears in the display,
then press AMS.
3. Turn AMS until “Timer REC” appears in the
display, then press AMS.
4. Press EDIT/NO.
4
Set the timer to the desired operation.
5
Having finished recording with a timer, choose
“Timer OFF” from the Setup Menu.
1. Perform steps 1 and 2 in step 3 above.
2. Turn AMS until “Timer OFF” appears in the
“Timer OFF” from the Setup Menu.
1. Perform steps 1 and 2 in step 3 above.
2. Turn AMS until “Timer OFF” appears in the
display, then press AMS.
3. Press EDIT/NO.
If you leave the setup Menu “Timer REC” setting,
the recorder will begin recording automatically
next time it is powered on.
If you leave the setup Menu “Timer REC” setting,
the recorder will begin recording automatically
next time it is powered on.
After timer recording, be sure to turn on the recorder within one
month
month
When you turn on the recoder next time, the recording will
be transfferd to the MD. If you leave the recorder
unpowered, the recording will not be transferred to the MD
when you turn on the recorder.
be transfferd to the MD. If you leave the recorder
unpowered, the recording will not be transferred to the MD
when you turn on the recorder.