Sony mds-e11 User Manual
Additional Information
35
Additional Information
“TOC Reading” appears for a long time
“TOC Reading” will be displayed for longer than normal
when an MD containing many songs is loaded.
when an MD containing many songs is loaded.
Limitations when recording over an existing track
• The correct remaining recording time may not be
displayed.
• You may find it impossible to record over a track if that
track has been recorded over several times already. If this
happens, erase the track using the Erase Function (see
page 20.)
happens, erase the track using the Erase Function (see
page 20.)
• The remaining recording time may be shortened out of
proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration of the
track.
track.
• You may find it impossible to label a track while recording
over it.
The correct recorded/playing time may not be displayed
during playback of monaural-format MDs.
during playback of monaural-format MDs.
Troubleshooting
If you experience any of the following difficulties while
using the recorder, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
using the recorder, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
The recorder does not operate or operates poorly.
/
The MD may be damaged (“Disc Error” appears.)
Take the MD out and insert it again. If “Disc Error”
remains, replace the MD.
remains, replace the MD.
The recorder does not play back.
/
Moisture has formed inside the recorder. Take the
MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
/
The recorder is not on. Press
U to turn the recorder
on.
/
The MD is inserted in the wrong direction. Slide the
MD into the disc compartment with the label side up
and the arrow pointing towards the opening until
the recorder grips it.
MD into the disc compartment with the label side up
and the arrow pointing towards the opening until
the recorder grips it.
/
The MD may not be recorded. Replace the disc with
one that has been recorded.
one that has been recorded.
The recorder does not record.
/
The MD is record-protected (“Protected” appears.)
Close the record-protect slot (see page 7.)
Close the record-protect slot (see page 7.)
/
The recorder is not connected properly to the sound
source. Make connections properly to the sound
source.
source. Make connections properly to the sound
source.
/
The recording level is not adjusted properly (in case
of input through LINE (ANALOG) IN.) Turn REC
LEVEL to adjust the recording level properly (see
page 11.)
of input through LINE (ANALOG) IN.) Turn REC
LEVEL to adjust the recording level properly (see
page 11.)
/
A premastered MD is inserted. Replace it with a
recordable MD.
recordable MD.
/
There is not enough time left on the MD. Replace it
with another recordable MD with fewer recorded
tracks, or erase unnecessary tracks.
with another recordable MD with fewer recorded
tracks, or erase unnecessary tracks.
/
There has been a power failure or the AC power
cord has been disconnected during recording. Data
recorded to that point may be lost. Repeat the
recording procedure.
cord has been disconnected during recording. Data
recorded to that point may be lost. Repeat the
recording procedure.
The recorder does not work during synchro-recording.
/
The currently selected CD player type (CD player or
video CD player) does not match the CD player
being used. Reset the CD player type (see page 14.)
video CD player) does not match the CD player
being used. Reset the CD player type (see page 14.)
The sound has a lot of static.
/
Strong magnetism from a television or a similar
device is interfering with operations. Move the
recorder away from the source of strong magnetism.
device is interfering with operations. Move the
recorder away from the source of strong magnetism.
Note
If the recorder does not operate properly even after you’ve
attempted the prescribed remedies, turn off the power, then
reinsert the plug into the power outlet.
attempted the prescribed remedies, turn off the power, then
reinsert the plug into the power outlet.