Sony MHC-F50 User Manual

System

Compact disc and digital
audio system

Laser

Semiconductor laser
(

λ

=780nm)

Emission duration:
continuous

Laser output

Max. 44.6 

µ

W*

*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.

Wavelength

780 – 790 nm

CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
(for MHC-F100/MHC-FR1 only)
Wavelength

600 nm

Recording system

4-track 2-channel stereo

Frequency response

60 – 13,000 Hz (±3 dB),

(DOLBY NR OFF)

using Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette

Wow and flutter

±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:

With 8 ohm loads (6 ohms loads for
MHC-F50), both channels driven, from 70 –
20,000 Hz; rated 100 watts (50 watts for
MHC-F50) per channel minimum RMS
power, with no more than 0.9% total
harmonic distortion from 250 milliwatts to
rated output.

Continuous RMS power output
Canadian model

100 + 100 watts
(8 ohms at 1 kHz,
5% THD) (for MHC-F100)
60 + 60 watts
(6 ohms at 1 kHz,
5% THD) (for MHC-F50)

Other models

100 + 100 watts
(8 ohms at 1 kHz,
10% THD)

Peak music power output (except for U.S. and
Canadian models):

1400 watts

Inputs

VIDEO/MD IN (phono
jacks): voltage 250 mV,
impedance 47 kilohms
MIX MIC (phone jack)
(for Singaporian model
only):  sensitivity 1 mV,
impedance 10 kilohms

Outputs

VIDEO/MD OUT (phono
jacks): voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
SPEAKER: accepts
impedance of 8 to 16
ohms (for MHC-F100/
MHC-FR1 only)
accepts impedance of 6 to
16 ohms (other models)
SURROUND SPEAKER
(for MHC-F100/MHC-
FR1 only):
accepts impedance of 16
ohms.
SUPER WOOFER (for
MHC-F100/MHC-FR1
only): Voltage 1 V,
impedance 1 kilo ohm