Sony 4-130-433-13(2) User Manual

Page of 56
16
GB
Slide and remove the battery 
compartment lid, then, insert the two 
supplied R6 (size AA) batteries, E side 
first, matching the polarities shown 
below.
Notes
• Do not mix an old battery with a new one or 
mix different types of batteries.
• If you do not use the remote for a long period 
of time, remove the batteries to avoid damage 
from battery leakage and corrosion.
Setting the clock
You cannot set the clock in Power Saving 
Mode.
Use the buttons on the remote for this 
operation.
1
Press "/1 to turn on the system.
2
Press CLOCK/TIMER SET 
(RM-AMU053) or TIMER MENU 
(RM-AMU054).
If “PLAY SET” appears on the 
display, press ./> 
(RM-AMU053) or 
V
/
v
 
(RM-AMU054) repeatedly to select 
“CLOCK SET” and then press 
ENTER (RM-AMU053) or 
 
(RM-AMU054).
3
Press .
/> (RM-AMU053) or 
V
/
v
 (RM-AMU054)
 repeatedly to 
set the hour, and then press 
ENTER (RM-AMU053) or 
 
(RM-AMU054).
4
Use the same procedure to set 
the minutes.
The clock settings are lost when you 
disconnect the power cord or if a 
power failure occurs. 
To display the clock when the 
system is turned off
Press DISPLAY repeatedly until the clock 
is displayed. The clock is displayed for a 
few seconds.
Using the remote
When carrying the unit
Do the following procedure to protect 
the disc mechanism.
Use the buttons on the unit for the 
operation.
1
Press "/1 to turn on the system.
2
Press CD.
3
Press Z OPEN/CLOSE to open 
the disc tray and remove the 
disc.
4
Press Z OPEN/CLOSE again to 
close the disc tray. Wait until 
“CD NO DISC” appears in the 
display.
5
Hold down DISC SKIP/
EX-CHANGE and then press 
"/1 until “STANDBY” appears 
in the display. Then, “MECHA 
LOCK” appears in the display.
6
Unplug the AC power cord.