Sony MHC-NXM1 User Manual

Page of 80
T
rou
b
les
hooti
ng
27
GB
Should you encounter a problem with your 
system, do the following:
1
Make sure the power cord and speaker 
cords are correctly and firmly connected.
2
Find your problem in the troubleshooting 
checklist below and take the indicated 
corrective action.
If the problem persists after doing all of the 
above, consult your nearest Sony dealer.
General
The display starts flashing as soon as you 
plug in the power cord even though you have 
not turned on the system (see step 4 of 
“Hooking up the system” (page 6)).
• Press 
?/1 while the system is off. The 
demonstration disappears.
“– –:– –” appears in the display.
• A power interruption has occurred. Set the clock 
(page 8) and timer settings (pages 21 and 22) 
again.
The clock setting/radio presetting/timer is 
canceled.
• Redo the following:
There is no sound.
• If your system has a voltage selector, make sure 
the voltage selector is set to the correct voltage.
• Press VOLUME + or turn VOLUME control on 
the unit clockwise.
• Make sure the headphones are not connected.
• Check the speaker connections (page 6).
• There is no audio output during Rec Timer.
Sound comes from one channel, or 
unbalanced left and right volume.
• Place the speakers as symmetrically as possible.
• Connect the supplied speakers.
There is severe hum or noise.
• Move the system away from the source of noise.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to 
the power cord. 
The timer cannot be set.
• Set the clock again (page 8).
The timer does not function.
• Check the timer setting and set the correct time 
• Cancel the Sleep Timer Function (page 20).
Troubleshooting
Problems and remedies
When the 
?/1 indicator flashes
Immediately unplug the power cord and 
check the following items.
• If your system has a voltage selector, is the 
voltage selector set to the correct voltage?
Check the voltage for your region, then 
make sure the voltage selector is set 
correctly.
• Are the + and – speaker cords short-
circuited?
• Are you using the supplied speakers?
• Is anything blocking the ventilation holes 
on the rear of the system?
Check all the above items and fix any 
problems found. 
After 
?/1
 indicator 
stops flashing,
 reconnect the power cord 
and turn on the system. If the indicator still 
flashes, or if the cause of the problem cannot 
be found even after checking all the above 
items, consult your nearest Sony dealer.
continued