Sony MHC-GZRDi User Manual

MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-11(1)

To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or 

moisture.

To reduce the risk of fire, do not cover the 

ventilation opening of the apparatus with 

newspapers, tablecloths, curtains, etc.

Do not place the naked flame sources such 

as lighted candles on the apparatus.
To reduce the risk of fire or electric shock, 

do not expose this apparatus to dripping 

or splashing, and do not place objects 

filled with liquids, such as vases, on the 

apparatus.
As the main plug is used to disconnect 

the unit from the mains, connect the unit 

to an easily accessible AC outlet. Should 

you notice an abnormality in the unit, 

disconnect the main plug from the AC 

outlet immediately.
Do not install the appliance in a confined 

space, such as a bookcase or built-in 

cabinet.
Do not expose batteries or apparatus with 

battery-installed to excessive heat such as 

sunshine, fire or the like.
The unit is not disconnected from the 

mains as long as it is connected to the 

AC outlet, even if the unit itself has been 

turned off.
Excessive sound pressure from earphones 

and headphones can cause hearing loss.

CAUTION
The use of optical instruments with this 

product will increase eye hazard.

This appliance is classified as a CLASS 1 

LASER product. This marking is located 

on the rear exterior.

applying EU directives.
The manufacturer of this product is Sony 

Corporation, 1-7-1 Konan Minato-ku, 

Tokyo, 108-0075 Japan. The Authorized 

Representative for EMC and product safety 

is Sony Deutschland GmbH, Hedelfinger 

Strasse 61, 70327 Stuttgart, Germany. For 

any service or guarantee matters, please 

refer to the addresses given in separate 

service or guarantee documents.

This symbol is intended 

to alert the user to the 

presence of uninsulated 

“dangerous voltage” 

within the product’s 

enclosure that may be 

of sufficient magnitude 

to constitute a risk 

of electric shock to 

persons.

This symbol is intended 

to alert the user to the 

presence of important 

operating and 

maintenance (servicing) 

instructions in the 

literature accompanying 

the appliance.