Sony Model XR-C7200 User Manual

Press (SOUND) two seconds while
pushing the VOL control.

You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble level
respectively.

Select the item you want to adjust by
pressing (SOUND) repeatedly.

VOL (volume) n BAS (bass) n TRE (treble)  n
BAL (left-right) n FAD (front-rear)

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selection.
(After three seconds, the dial works as the
volume control dial.)

The unit decreases the volume automatically
when a telephone call is received (Telephone-
mute function).

You can set:
• Clock (page 5)
• D. Info (Dual Information) to display the

clock and the play mode at the same time
(ON), or to display the information
alternately (OFF).

• Amber/Green to change the illumination

color to amber or green.

• Dimmer to change the brightness of the

display.
— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.

• Contrast to adjust the contrast if the

indications in the display are not
recognizable because of the unit’s installed
position.

• Beep to turn on or off the beeps.
• RM (Rotary Commander) to change the

operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary

commander in the factory preset position.

— Select “rev” when you mount the rotary

commander on the side right of the
steering column.

• Loud (Loudness) to enjoy bass and treble

even at low volume. The bass and treble will
be reinforced.

• A. Scrl (Auto Scroll) (page 12)

Press (SHIFT), then press (2) (SET UP).

Press (2) (SET UP) repeatedly until the
desired setting mode appears.

Each time you press (2) (SET UP), the item
changes as follows:

Clock n D.Info n Amber/Green n Dimmer n
Contrast n Beep n RM n Loud n A.Scrl

Press (4) (n) to select the desired
setting (for example: “on” or “off”).
For the “Contrast” setting, pressing (4)
(n) makes the contrast higher, and
pressing (1) (N) makes the contrast lower.

Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.

Other Functions