Sony MKS-2017 User Manual
Ch
ap
te
ap
te
tem Set
tings
159
Basic Settings
The “XPT Button” (cross-point button) list appears at
the left of the status area. This list includes the
following items.
No: cross-point button number
P-No: video signal and key signal pair number
Video: video signal name (source name)
Key: key signal name (source name)
the left of the status area. This list includes the
following items.
No: cross-point button number
P-No: video signal and key signal pair number
Video: video signal name (source name)
Key: key signal name (source name)
The “Video/Key Pair” list appears at the right of the
status area. This list includes the following items.
P-No: video signal and key signal pair number
Video: video signal name (source name) being one of
status area. This list includes the following items.
P-No: video signal and key signal pair number
Video: video signal name (source name) being one of
the pair
2
Using any of the following methods, select the cross-
point button number to which you want to assign the
signal.
point button number to which you want to assign the
signal.
• Press a cross-point button in the AUX bus control
block.
• Press directry on the “XPT Button” list in the status
area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
a) For 1 M/E panel and 1.5M/E panel
b) For 1.5 M/E wide panel
b) For 1.5 M/E wide panel
The selected number appears in reverse video.
3
Using any of the following methods, select the pair
number for the video signal and key signal you want to
assign to the selected cross-point button number.
number for the video signal and key signal you want to
assign to the selected cross-point button number.
• Press directry on the “Video/Key Pair” list in the
status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
4
Press [Set] in the button area.
To disable any cross-point button
You can disable a cross-point button to which a signal is
assigned so that pressing it does not select the signal.
In step 2, select the desired button number, and press
[Inhibit], turning it on.
You can disable a cross-point button to which a signal is
assigned so that pressing it does not select the signal.
In step 2, select the desired button number, and press
[Inhibit], turning it on.
Creating a pair from a video signal and key
signal
signal
To create a pair from a video signal and key signal to be
assigned to a cross-point button, use the Video/Key Pair
Assign menu.
assigned to a cross-point button, use the Video/Key Pair
Assign menu.
1
From the top menu, select Setup/Diag >Operation >V/
K Pain Assign.
K Pain Assign.
The Video/Key Pair Assign menu appears.
The “Video/Key Pair” list appears at the left of the
status area. This list includes the following items.
P-No: video signal and key signal pair number
Video: video signal name (source name)
Key: key signal name (source name)
status area. This list includes the following items.
P-No: video signal and key signal pair number
Video: video signal name (source name)
Key: key signal name (source name)
The “Source” list appears at the right of the status area.
This list includes the following items.
No: source signal number
Source: source signal name
This list includes the following items.
No: source signal number
Source: source signal name
2
Using any of the following methods, select the pair
number you want to create (or combination you want
to change).
number you want to create (or combination you want
to change).
• Press directry on the “Video/Key Pair” list in the
status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
The selected pair number appears in reverse video.
3
To set the video signal for the selected pair, press
[Video Assign] in the button area, setting it to
“Enable.”
[Video Assign] in the button area, setting it to
“Enable.”
4
Using any of the following methods, select the source
number to be assigned as the video signal.
number to be assigned as the video signal.
• Press directry on the “Source” list in the status area.
Knob
Description
Setting
values
values
1 (Button No)
Cross-point button number
selection
selection
1 to 24
a)
1 to 40
b)
Knob
Description
Setting
values
values
4 (Pair No)
Pair number selection
P1 to P40
Knob
Description
Setting
values
values
1 (Pair No)
Pair number selection
P1 to P40