Sony MHC-S90D User Manual
47
MHC-S90D 4-235-983-13(2) GB
Tape
Do this
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press
CLOCK/TIMER SELECT on
the remote) and press
O or o
repeatedly to select “REC
SELECT”, then press ENTER
(A/V amplifier or remote).
SELECT”, then press ENTER
(A/V amplifier or remote).
Start over from step 1.
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press
CLOCK/TIMER SELECT on
the remote) and press
O or o
repeatedly to select “TIMER
OFF”, then press ENTER (A/
V amplifier or remote).
OFF”, then press ENTER (A/
V amplifier or remote).
Timer-recording radio
programs
programs
To timer-record, you must set the clock (see
“Setting the time” on page 17) and preset the
radio stations (see “Presetting radio stations”
on page 42) beforehand.
“Setting the time” on page 17) and preset the
radio stations (see “Presetting radio stations”
on page 42) beforehand.
1
Tune in the preset radio station (see
“Listening to the radio” on page 42).
“Listening to the radio” on page 42).
2
Press CLOCK/TIMER (or CLOCK/TIMER
SET on the remote).
SET on the remote).
“DAILY1 SET” flashes.
3
Press
O or o repeatedly to select “REC
SET”, then press ENTER (A/V amplifier
or remote).
or remote).
“ON” appears and the hour indication
flashes.
flashes.
4
Set the time to start recording.
Press
O or o repeatedly to set the hour, then
press ENTER (A/V amplifier or remote).
The minute indication flashes.
Press
The minute indication flashes.
Press
O or o repeatedly to set the minutes,
then press ENTER (A/V amplifier or
remote).
The hour indication flashes again.
remote).
The hour indication flashes again.
5
Set the time to stop recording following
step 4.
step 4.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
6
Insert a recordable tape into deck B.
7
Turn off the power.
When the recording starts, the volume level
is set to the minimum.
is set to the minimum.
To
Check the setting
Change the setting
Cancel the
Timer-recording
Timer-recording
Notes
• If the power is on at the preset time, the Timer-
recording does not work.
• When you use the Sleep Timer, the Timer-recording
will not turn on the system until the Sleep Timer
turns it off.
turns it off.
• The power turns on 15 seconds before the preset
time.