Sony Model STR-DK5 User Manual
masterpage:Left
lename[F:\Sony SEM
HA\Revison3_DK5\JC06xxx_2656285141STRDK5_GB\2656285141\GB09REM_STR-DK5-
SP.fm]
SP.fm]
36
GB
model name1[STR-DK5]
[2-656-285-14(1)]
Tips
• To activate the buttons with orange printing, press
TV and the button you want simultaneously.
• Before you use the
V/v/B/b button for receiver
operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the input button.
components, press TOP MENU/GUIDE or AV
MENU after pressing the input button.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
component the above operation may not be possible
or may operate differently than described.
• When you press input buttons (VIDEO 1, VIDEO 2
or DVD), the input mode of the TV might not switch
to the corresponding input mode that you want. In
this case, press TV/VIDEO button to switch the input
mode of the TV.
to the corresponding input mode that you want. In
this case, press TV/VIDEO button to switch the input
mode of the TV.
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a CD player and
you do not have a DVD player, you can assign
the DVD button to your CD player.
match your system components, you can change
them. For example, if you have a CD player and
you do not have a DVD player, you can assign
the DVD button to your CD player.
1
Hold down the input button whose
input you want to change (for example,
DVD).
input you want to change (for example,
DVD).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 5 – CD
player).
component you want to assign to the
input button (for example, 5 – CD
player).
The following buttons are assigned to select
the input:
the input:
*Sony VCRs are operated with a VTR 2 or 3
setting. These correspond to 8 mm and VHS
respectively.
respectively.
Now you can use the DVD button to control
the CD player.
the CD player.
To reset a button to its factory
setting
setting
Repeat the above procedure.
To reset all the input buttons to
their factory setting
their factory setting
Press ?/1, TEST TONE and MASTER VOL –
at the same time.
at the same time.
Remote
Button
Button
Operations
Function
X ws
VCR/
CD player/
DVD player/
MD deck/
Tape deck
CD player/
DVD player/
MD deck/
Tape deck
Pauses playback or
recording. (Also starts
recording with
components in
recording standby.)
recording. (Also starts
recording with
components in
recording standby.)
x w;
VCR/
CD player/
DVD player/
MD deck/
Tape deck
CD player/
DVD player/
MD deck/
Tape deck
Stops playback.
O wj
DVD player
Returns to the
previous menu or
exits the menu.
previous menu or
exits the menu.
V/v wk
Receiver
Selects a menu item.
B/b wk
Receiver
Adjusts or changes
the setting.
the setting.
V/v/B/b wk VCR/
Satellite tuner/
DVD player
DVD player
Selects a menu item.
Changing the factory
setting of an input button
setting of an input button
To operate
Press
VCR (command mode VTR 3*)
1
VCR (command mode VTR 2*)
2
DVD player or
DVD recorder
(command mode DVD1)
DVD recorder
(command mode DVD1)
3
DVD recorder
(command mode DVD3)
(command mode DVD3)
4
CD player
5
MD deck
6
Tape deck B
7
Tuner (this receiver)
8
DSS (Digital Satellite Receiver)
9
DCS (Digital CS Tuner)
0/10
BSD (Digital BS Tuner)
-/--
GB01COV_STR-DK5-SP.book Page 36 Monday, February 20, 2006 6:34 PM