Sony MPK-DVF7 User Manual

Set the POWER switch to ON.

The camcorder turns on and a picture appears on the LCD monitor.

Press START/STOP button to start recording.

The REC lamp (red) lights up during recording.
To stop recording, press START/STOP button again.

START/STOP
button

REC lamp
(red)
LEAK lamp
(yellow)

ZOOM button

PHOTO button

AUTO FOCUS
ON/OFF button

POWER switch

Now you are ready for underwater recording.
When you dive with the camcorder, dive slowly, paying attention to the surrounding environment.
Be careful not to strike the marine pack against rocks or reef, etc.

Press ZOOM button.
Press T for telephoto (subject appears closer) and W for wide-angle (subject appears further away).
You cannot change the zooming speed of the camcorder.

You can record a still image on the camcorder by pressing the PHOTO button.
Note that pressing PHOTO button lightly does not allow you to check the recorded image. For more
details, refer to the operating instructions supplied with your camcorder.

Note
If you use the marine pack with a DVD Handycam, you cannot record still images.

Press AUTO FOCUS ON/OFF button to set it to OFF. You can still keep the subject in focus even if
fish swim between the camcorder and the subject. Press AUTO FOCUS ON/OFF button again to set
the camcorder to auto focus mode.

Note
Do not cover the control emitter or detector with your finger as the remote control signal for
operations is transmitted from the grip to the marine pack.