Sony MZ-E501 User Manual

Page of 2
Portable MiniDisc
Player
Operating instructions
使用說明書
MZ-E501
Sony Corporation © 2001 Printed in Japan
“WALKMAN” is a trademark of Sony Corporation.
3-231-629-14(1)
A
A
B
 
b
 
e
E
 
b
 
C
m
D
2
1
b
4
3
B
HOLD
HOLD
C
A
B
C
> N
.
VOL+/–
GROUP
x
x
X
1N>
VOL+
VOL–
.
2
D
A
./N>
VOL +/–
HOLD
DISPLAY
SOUND
PLAYMODE
RPT/ENT
x
X
B
E
A
Playback when group mode is off:
Playback starts with the first track in the disc, and stops with
the last track in the disc.
組群模式關著時的播放:
播放將從光盤的第一首曲子開始,而停止在光盤的最後一首曲
子。
1 2 3
7 8
5 6
4
Track number
Disc
Playback when group mode is on:
Playback of the selected group starts with the first track in
the group, and stops with the last track in the group.
組群模式打開著時的播放:
所選組群的播放將從組群的第一首曲子開始,而停止在該組群的
最後一首曲子。
1 2 3
1 2
1 2
4
Track number
Disc
Group 1
Track number
Group 2
Track number
Group 3
B
When there is a group name (Example: AAA)
有組群名時(例如:AAA)
Group name
組群名
When there is no group name
沒有組群名時
Group number
組群號
F
B
A
Track number
樂曲號
Program number
編程號
Insert the plugs firmly.
牢固地插入插頭。
3 Color Info-LED
3 色資訊發光二極管
Insert the prongs until
they are firmly attached.
插入叉尖裝穩固。
to a wall outlet
至牆上插座
to DC IN 3V jack
至 DC IN 3V 插口
Make sure the CHARGE
lamp turns on.
確認是否點亮了 CHARGE 燈。
English
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the apparatus
with news papers, table cloths, curtains, etc.  And don’t place
lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with
liquids, such as vases, on the apparatus.
Certain countries may regulate disposal of the battery used to
power this product.  Please consult with your local authority.
CAUTION — INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
Information
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY
DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
B
Getting started
Preparing a power source
Using the rechargeable battery
Charge the supplied rechargeable battery before using it for the
first time.
Assemble the battery charging stand as shown in Fig. A-A.
1
Insert the supplied rechargeable battery NH-14WM into the
rechargeable battery compartment with correct polarity (see
Fig. A-B).
2
Connect the supplied AC power adaptor to the battery
charging stand and plug the AC power adaptor into an
electrical outlet (see Fig. A-C).
3
Place the player on the battery charging stand.
The CHARGE lamp will light up.
Full charging takes about 6 hours.
The CHARGE lamp will go off when charging is complete
(see Fig. A-C).
• Do not operate the player when you place it on the
battery charging stand or during charging.  If you do so,
it may cause the player to malfunction or prevent the
battery from charging.
• The supplied battery charging stand is for use with the
NH-14WM only.  It cannot be used with the NC-6WM.
Using a dry battery (see Fig. A-D)
Attach the supplied battery case to the player, and then insert
one LR6 (size AA) battery with correct polarity.  Be sure to insert
the minus (#) terminal of the battery first.
When to replace or recharge the battery
You can check the battery condition with the battery indication
on the remote control and the 3 Color Info-LED on the player
while using the player.
Indication on the remote control
t
Battery power decreasing
v
r
Weak battery
v
e
The battery has gone out.  “LOW BATT” flashes in the display on
the remote control, and the power goes off.
3 Color Info-LED indication on the player
The LED lights up.
There is sufficient battery power.
v
The LED flashes slowly.
Battery power decreasing
v
The LED flashes quickly.
The battery is low.  Soon, the LED will turn off
and the supply of power will stop.
Notes
• The battery indication may show the battery to be fully charged even
when it is not.  Charging the battery shorter than the prescribed time
will result in a shorter operating time on the player.
• The battery indication will show a low charge during a forward or
backward operation when the operating temperature is extremely low.
Battery life
(Unit: Approx. hours) (JEITA
1)
)
Batteries
Ni-MH rechargeable
battery
NH-14WM (A)
2)
LR6 (SG) Sony
Alkaline dry battery
3)
LR6 (SG)
3)
 and
NH-14WM (A)
2)
1)
Measured in accordance with the JEITA (Japan Electronics and Information
Technology Industries Association) standard (using a Sony MDW-series
Mini-disc).
2)
With a fully charged battery
3)
When using a Sony LR6 (SG) “STAMINA” alkaline dry battery (produced in Japan).
Note
The battery performance may be shorter than the specified duration,
depending on the operating conditions, the temperature of the location,
and the type of battery being used.
Connecting the headphones/
earphones 
(see Fig.B)
Connect the supplied headphones/earphones to the remote
control.
Connect the remote control to i jack on the player.
Slide HOLD on the remote control and the player to the
directions of the arrows shown in the illustration.
B
MD playing
Playing an MD 
(see Fig.C)
1
Insert an MD.
1
Press OPEN (see Fig. C-A).
2
Insert the MD with the label side facing up, and press
the lid down to close (see Fig. C-B).
2
Play the MD (see Fig. C-C).
1
Turn the control towards N> on the remote control
(or press > N on the player).
When using the remote control, a short beep sounds in
the headphones/earphones.
2
Pull and turn VOL +/– on the remote control (or press
VOL +/– on the player) to adjust the volume.
The volume indicator will appear on the remote control,
allowing you to check the volume level.  After you
adjust the volume, push back the control.
To stop play, press x.
Playback starts from the point you last stopped playing.  To start
playback from the beginning of the disc, turn and hold the
control towards N> on the remote control (or press > N
down on the player) for 2 seconds or more.
About the 3 Color Info-LED on the player
The 3 Color Info-LED indicates the current operating status by
the lighting up in the following colors:
LED color
Operating status
Red
Normal play (The LED lights up continuously)
Green
Group mode* (The LED lights up continuously)
Orange
Group skip mode* (The LED lights for about 5
seconds)
* For more details, see “Using the Group Function.”
When the battery is exhausted, the LED flashes.  For more
details, see “When to recharge or replace the battery.”
B
Other disc operation
To
Pause
Find the beginning of
the current track/
the beginning of
the previous track
Find the
beginning of the
next track
Go backwards
while playing
2)
Go forward
while playing
2)
Remove the MD
1)
You can turn off the beep sound.  For more details, see “Turning off the
beep sound.”
2)
When you press . or > N on the player during pause, the
player resumes playback.
If you turn and hold the control towards . or N> on the remote
control (or hold down . or > N on the player) during pause,
you can fast forward/rewind without listening to the playback sound.
3)
Once you open the lid, the point to start playback changes to the
beginning of the first track.
About the G-PROTECTION function
The G-PROTECTION function has been developed to provide excellent
protection against sound skipping during many active uses.  This
function provides a higher level of shock protection during playback than
the traditional one.
Tips
• The player can play the track recorded by 2 
× or 4 × long playing mode
(LP2 or LP4).  Normal stereo playback, LP2 stereo playback, LP4 stereo
playback or monaural playback is automatically selected to match the
audio source.
• During the operation of the unit, the 3 Color Info-LED on the player
turns on.  After you press x to stop the playback, the 3 Color Info-LED
turns off.
• The display on the remote control will turn off shortly after you press x.
Notes
• When removing the disc, make sure to press x first, and then press
OPEN.
• Sound may skip if:
— the player receives stronger continuous shock than expected.
— a dirty or scratched MiniDisc is played.
B
Various ways of playback
Selecting the play mode 
(see Fig.D)
You can select from various play modes using the PLAYMODE
and RPT/ENT on the remote control.
1
Press PLAYMODE repeatedly to select one of the four play
modes, as follows:
Play mode display
Playback status
(none) (normal play)
1” (single play)
SHUF” (shuffle play)
PGM” (program play)
Listening to tracks in a desired sequence
(Program Play)
1
During playback, press PLAYMODE on the remote control
repeatedly until “PGM” flashes in the display.
2
Turn the control on the remote control repeatedly to select a
track number (see Fig. D-B).
3
Press RPT/ENT on the remote control.
The track is entered.
4
Repeat steps 2 and 3 to select other tracks in the desired
sequence.
5
Press RPT/ENT for 2 seconds or more.
The settings are entered and playback starts from the first
programmed track.
Tips
• The program play settings will remain in memory even after playback
finishes or is stopped.
• You can set the program play up to 20 tracks.
Notes
• All program settings are lost when the disc is removed from the player.
• If no settings are made for 5 minutes while the player is stopped, the
settings made up to that point are entered.
• If you use the group function during program play, the program
setting will be lost.
Repeat play
You can use this function to repeat playback in normal play,
single play, shuffle play, or program play mode.
1
Press RPT/ENT on the remote control during playback.
“ ” appears in the display.
Using the group function
 (See Fig.E)
The MZ-E501 can be used with a disc which has group settings.
The group function is useful for playing a great number of
tracks, or tracks that have been recorded in MDLP (LP2/LP4)
mode.
What is a disc with group settings?
This is a disc with settings that organize tracks into groups, and
which allow those groups to be selected.
The MZ-E501 does not support the recording of group settings.
If your recorder has a function for editing disc names, you can
use it to register groups.
Listening to tracks in a specific group
(Group Mode Playback) (see Fig. 
E-A)
1
Insert a disc which has group settings into the player, and
then play the disc.
2
Press DISPLAY on the remote control for 2 seconds or more.
3
Turn the control on the remote control repeatedly until
“GROUP” flashes, and then press x on the remote control.
4
Turn the control on the remote control repeatedly until
“GROUP ON” flashes, and then press x on the remote
control.  (Or on the player, press GROUP for 2 seconds or
more.)
“G” (group mode) appears in the display of the remote
control and then group mode is turned on.
The 3 Color Info-LED on the player lights up green.
Playback stops at the end of the last track in the selected
group.
For details on selecting another group, see “Selecting and
playing desired groups.”
Tip
When group mode is on, it is possible to do repeat play, shuffle play, or
program play.  For details on the respective operations, see “Selecting the
play mode.”
To turn off group mode
Select “GROUP OFF” and press x in step 4.  (Or on the player,
hold down GROUP for 2 seconds or more.)
The 3 Color Info-LED lights up red and group mode turns off.
Notes
• Group mode is cancelled when the lid is opened.
• If you try to turn on group mode with a track that does not belong to
any group, “Invalid GP” will flash in the display.  If this happens,
change to group skip mode and select a track that belongs to a group
(see “Selecting and playing desired groups”).  Then repeat step 2.
• If “NO GROUP” appears in the display on the remote control in step 4,
it means that you are using a disc that has no group settings.  Insert a
disc with group settings and repeat step 1.
• If group mode is off and you try to play a disc that has group settings,
the following the text string may appear in the display.
Example:
0;Favorites//1–5;Rock//6–9;Pops//
1
2
3
1
Disc name “Favorites”
2
Group name “Rock” : registered tracks 1 to 5
3
Group name “Pops” : registered tracks 6 to 9
Selecting and playing desired groups
(Group Skip Function)
With a disc which has group settings, you can skip from the
currently playing group to any other group on the MD.
1
Insert a disc which has group settings into the player and
play the disc.
2
Hold down PLAYMODE on the remote control until “– – –”
flashes in the display.  (Or on the player, press GROUP.)
The 3 Color Info-LED on the player lights up orange, and
the player enters group skip mode.
3
While the LED lights up orange (for 5 seconds), turn the
control on the remote control repeatedly until the name or
number of the desired group appears (see Fig. E-B).
During playback in group mode, playback of the selected
group starts with the first track in the group and stops with
the last track in the group.
During normal playback, playback of the selected group
starts with the first track in the group and stops with the last
track on the disc.
Tip
The group skip function can be used at any time during playback,
regardless of whether the player is in group mode on or not.
Notes
• If no operation is performed within 5 seconds after step 2, group skip
mode is cancelled.  To continue the procedure, start from step 1 again.
• Group skip mode cannot be used with a disc that has no group
settings.
B
Other operations
knowing the track name and
playing time 
(see Fig.F)
Press DISPLAY on the remote control.
Each time you press DISPLAY, the display changes the
indications as the follows (See Fig. F):
A
B
Track number
The elapsed time
Track number
Track name
1)
The number of total
Group name
2)
tracks in the group
The number of total tracks
Disc name
1)
Track number
Track mode
3)
1)
Appears only with MDs that have been electronically labeled.  “
 : ”
appears when no track name is recorded, and “
 : ” appears when
no disc name is recorded.
2)
Appears only when the group function is on.
If a group has no name, the group number appears.
3)
The mode for each track is indicated as follows:
“Mode : SP”
Standard mode (stereo)
“Mode : LP2”
× mode (2 × normal playing time)
“Mode : LP4”
× mode (4 × normal playing time)
“Mode : MONO”
Monaural
Tip
The group name appears when you select the group on group skip mode.
For more details, see “Selecting and playing desired groups” in “Using
the group function.”
Note
The mode indication appears only during playback.  It appears for 2
seconds, and is then replaced by the elapsed time of the current track.
All the tracks are played once.
A single track is played once.
All the tracks are played in random
order.
Tracks are played in the order that
you specified.
SP Stereo
LP2 Stereo
LP4 Stereo
(normal)
29
33
37
43
51
60
76
87
100
Do this (Beeps
1)
 in the headphones/
earphones when the remote control
is operated)
Press X on the remote control
(Continuous short beeps).
Press X on the remote control again to
resume playback.
2)
Turn the control towards . on the
remote control once (Three short beeps).
(Or press . on the player once.)
Turn the control towards . on the
remote control repeatedly (Continuous
three short beeps).  (Or press . on
the player repeatedly. )
Turn the control towards N> on the
remote control (Two short beeps).
Press > N on the player once.
Turn and hold the control towards .
on the remote control.
Hold down . on the player.
Turn and hold the control towards
N> on the remote control.
Hold down > N on the player.
Press x, and then press OPEN.
3)
中文
警告
為預防火災和觸電,不要讓唱機淋雨和受潮。
請勿將本系統安放在書櫥或壁櫥等狹窄封閉處。
為防止發生火災,請勿用報紙、桌布、窗簾等蓋住通風孔。另
請勿將點燃的蠟燭置於本設備上。
為防止發生火災或電擊的危險,請勿將裝滿液體的物件(例如
花瓶)置於本設備上。
一些國家對向本產品提供電力的電池的處理有法律規定。請向
當地有關部門咨詢。
注意 — 當打開機蓋時,會有不可見的鐳射光輻射出來。
不要盯著光束或直接用光學儀器觀看。
資訊
銷售商對因產品質量問題或使用任何產品引起的直接和偶然事故、由此
引起任何性質的傷害、損失及費用不承擔任何責任。
B
準備啟用
準備電源
使用充電池
第一次使用附帶的充電池前,請先充電。
圖 A-A 表示電池充電架。
1
將附帶的充電池 NH-14WM 裝入充電池室,須使對準極性。(見
圖 A-B)
2
把附帶的 AC 電源轉接器連接到電池充電架並把 AC 電源轉接器
接插到電源插座(見圖 A-C)。
3
將唱機放在電池充電架上。
即點亮 CHARGE 燈。
完全充滿電大約需要 6 個小時。
完成充電時, CHARGE 燈即熄滅(見圖 A-C)。
• 唱機還裝放在充電架上時,或正在充電中,都請不要操作唱機。在
此狀況下如果操作唱機,便可能引起唱機發生故障或妨礙電池充
電。
• 所附帶的電池充電座限用於 NH-14WM 而已,是不能用於 NC-6WM 的。
使用乾電池(見圖 A-D)
把附帶的電池盒裝在唱機上,再將一節 LR6(AA , 3 號)電
池按正確極性插入盒中。一定要先將電池的負極 (#) 插入。
何時更換電池或給電池充電
可以用遙控器上的電池指示檢查電池的條件和在使用唱機時的
唱機上的 3 色資訊發光二極管。
遙控器上的指示
t
電池電力下降
v
r
電池電力很弱
v
e
電池電力用完。遙控器上顯示器顯示“LOW BATT”。電力用完。
唱機上的 3 色資訊發光二極管指示
點亮發光二極管。
有足夠的電池電力。
v
慢閃爍著發光二極管。
電池電力減小。
v
快閃爍著發光二極管。
電池電力低。很快地,發光二極管就要熄滅而停
止供電。
• 即使電池並沒有充滿電,電池指示也可能作已充滿了電的指示。充電時間
如果短於上述時間,也將縮短能操作唱機的時間。
• 當唱機正在前進或後退,或在極低溫條件下操作使用時,電池指示將顯示
低充電狀態。
電池壽命
(單位:大約時數)(JEITA
 1)
)
電池
Ni-MH
充電式電池
NH-14WM(A) 
2)
LR6(SG)Sony
鹼電池
 3)
LR6(SG)
3)
NH-14WM(A)
 2)
1)
基於 JEITA (Japan Electronics and Information Technology
Industries
 Association) 標準測得(使用 Sony MDW 系列的迷你光
盤)。
2)
完全充滿電的電池。
3)
使用一節 Sony LR6 (SG)“STAMINA”鹼電池(日本生產)時。
電池的效能可能會根據操作條件,當地溫度,和所使用的電池類型而短於所
定耐用時間。
連接頭戴耳機 耳機
(見圖 B)
把附帶的頭戴耳機 耳機與遙控器連接。
把遙控器連接至唱機的 i 插口。
按圖示沿箭頭方向滑動遙控器和唱機上的 HOLD 鈕。
B
MD 播放
播放 MD
(見圖 C)
1
插入 MD 。
1
按 OPEN 鈕(見圖 C-A)。
2
插入 MD ,標籤面朝上,按下蓋子把它關閉(見圖 C-
B
)。
2
播放 MD(見圖 C-C)。
1
將遙控器上的控制鈕轉向 N > (或按唱機上的 >
N
)。
當使用遙控器時,頭戴耳機 耳機裡會聽到一短促嘟聲。
2
拉出並轉動遙控器上的 VOL +/–(或按唱機上的 VOL +/–)
調節音量。
音量指示出現在遙控器上可讓您核對音量電平。調整完音
量之後,請推回音量控制器。
要停止播放時,請按 x 。
播放將從最後停止播放的點開始。您如果要從光盤的開頭開始
播放,便請向遙控器上的 N> 旋轉並握住控制器(或按下唱機
上的 > N)2 秒或以上。
關於唱機上的 3 色資訊發光二極管
3色資訊發光二極管是利用點亮以下彩色以指示當前的操作狀況:
發光二極管彩色
操作狀況
紅色
正常播放(連續點亮發光二極管)
綠色
組群模式 *(連續點亮發光二極管)
橙色
組群跳越模式 *(點亮發光二極管大約 5 秒)
* 詳細,請參看“使用組群功能”。
當電池耗完了電時,將閃爍著LED。詳細內容,請參看“何時
給電池充電或更換電池”。
B
其他光盤操作
暫停
找出當前
前面樂曲
的開頭
聽下一樂曲的開頭
播放中要倒退
2)
播放中要前進
2)
取出 MD
1)
嘟聲可以關掉。詳細內容,請參看“關掉嘟聲”。
2)
暫停時按唱機上的 . 或 > N ,唱機即恢復播放。
如果暫停時將遙控器上的控制鈕轉向 . 或 N> 並按住(或按住唱
機上的 . 或 > N),可以不收聽播放的聲音而快進或快倒。
3)
一旦打開蓋,播放起始點即將移到第一首樂曲的開頭。
關於 G-PROTECTION 功能
G-PROTECTION 功能已研製成能提供卓越的,在許多運用上可防止跳音的作
用。本功能比傳統的,能提供更高水平的防衝擊功能。
要領
• 唱機可以播放用 2 倍或 4 倍長模式錄製的樂曲(LP2 或 LP4)。能自動選
擇普通立體聲播放,LP2立體聲播放,LP4立體聲播放或單耳聲播放以配
合聲源。
• 操作唱機期間,唱機即打開3色資訊發光二極管。按x停止播放後,3色
資訊發光二極管即熄滅。
• 按了 x 之後不久即關掉遙控器上的顯示。
• 當取出光盤時,必須先按 x ,然後按 OPEN 鈕。
• 下列情況下,可能發生跳音:
─ 唱機受到意外而連續的較強衝擊時。
─ 播放一張骯髒的,或有裂痕的 MD 。
B
各種播放方式
選擇播放模式
(見圖 D)
可用遙控器上的 PLAYMODE 和 RPT/ENT 可以選擇各種各樣播放
模式。
1
反復按 PLAYMODE 選擇 4 種播放模式之一,如下所示:
播放模式顯示
播放狀態
(無)(正常播放)
所有樂曲播放一遍。
1”(單曲播放)
某首樂曲播放一遍。
SHUF”(任意播放)
所有樂曲按隨機次序播放。
PGM”(編程播放)
樂曲按指定的次序播放。
按照所要順序聽樂曲(編程播放)
1
反復按遙控器上的 PLAYMODE ,直到“PGM”在顯示器上閃爍。
2
反復轉遙控器上的控制鈕以選擇曲號(見圖 D-B)。
3
按遙控器上的 RPT/ENT 。
曲子即被輸入。
4
重複第 2 和第 3 步,按要求的順序選擇其它樂曲。
5
按 RPT/ENT 2 秒鐘或更長。
設定輸入,播放從第一首編程的樂曲開始。
要領
• 即使播放結束或停止後,編程播放設定仍舊保存在存儲器中。
• 最多可編 20 首曲子的編程播放。
• 當從唱機中取出光盤時,所有編程設定都丟失。
• 如果唱機停止後 5 分鐘內沒有更多的設定,當前的設定被輸入。
• 進行程序播放中如果使用組群功能,即將失去該程序設定。
反復播放
可以使用此功能在正常播放、單曲播放或編程播放模式中進行
反復播放。
1
播放中,按遙控器上的 RPT/ENT ,“
”即出現在顯示器上。
使用組群功能
(見圖 E)
MZ-E501能使用具有組群設定的光盤。當要播放大量曲子,或
用MDLP(LP2/LP4)模式錄的曲子時,這個組群功能是非常方便的。
什麼叫做組群功能﹖
是已把曲子組成組群,並設定成可選擇這些組群的光盤。
MZ-E501 並不能對應組群設定的錄音。
您的錄音機如果具有編輯光盤名的功能,便可用於登記組群。
聽賞指定組群中的曲子(組群模式播放)
(見圖 E-A)
1
將具組群設定的光盤裝進唱機而開始播放光盤。
2
按遙控器上的 DISPLAY 至少 2 秒或以上。
3
反復旋轉遙控器上的控制器至閃爍著“GROUP”,然後按遙控器
上的 x 。
4
反復旋轉遙控器上的控制器至閃爍著“GROUP ON”,然後按遙
控器上的 x 。(或在唱機上,請按 GROUP 至少 2 秒或以上。)
遙控器的顯示器中即出現“G”
(組群模式),然後打開組群模
式。
唱機上的 3 色資訊發光二極管即點亮綠色。
播放,將停止在所選組群中最後一曲的末端。
關於選擇另外組群的方法詳細,請參看“選擇及播放所要組
群”。
要領
當打開著組群模式時,便能做反復播放,任意順序播放,或程序播放。有關
各該操作的詳細,請參看“選擇播放模式”。
要解除組群模式時
請在步驟 4 中選擇“GROUP OFF”並按 x 。(或在唱機上,請
按 GROUP 至少 2 秒或以上。)
3 色資訊發光二極管即點亮紅色而關掉組群模式。
• 當打開了機蓋時,組群模式即被解除。
• 您如果給不屬於任何組群的曲子試圖打開組群模式功能使用時,顯示器紅
將閃爍著“Invalid GP”
(組群無效)。此時,請用組群跳越模式選擇有
屬於某組群的曲子(參看“選擇及播放所要組群”),並重復步驟 2 的操
作。
• 在步驟 4 裡,如果遙控器上的顯示器中出現“NO GROUP”,即表示所使
用的光盤並無組群設定。請裝入擁有組群設定的光盤,然後重復步驟2的
操作。
• 您如果關掉了組群模式而試圖播放一擁有組群設定的光盤時,顯示器中便
可能出現如下文串。
例:
0;Favorites//1-5;Rock//6-9;Pops//
1
2
3
1
光盤名“Favorites”(最喜歡的)
2
組群名“Rock”(搖滾樂):登記有曲 1 到曲 5
3
組群名“Pops”(流行歌曲):登記有曲 6 到曲 9
選擇及播放所要組群(組群跳越功能)
在組群跳越模式中,您可以從現在播放中的組群跳越到 MD 上
的任何其他組群。
1
將帶有組群的光盤裝入唱機並開始播放光盤。
2
按下遙控器上的 PLAYMODE 至顯示器中閃爍著“– – –”。(或
在唱機上,請按 GROUP 。)
唱機上的3色資訊發光二極管即將點亮橙色,唱機即進入組群
跳越模式。
3
當唱機上的發光二極管點亮著燈色時(5 秒),請反復旋轉遙
控器上的控制器至出現所要組群的名稱或所要組群的號數。
(見圖 E-B)
在組群模式播放中,所選組群將從組群中的第一首曲子開始播
放而停在組群中最後的曲子。
在正常播放中,將從所選組群的第一首曲子開始播放而停在光
盤的最後一首曲子。
要領
播放中,無論有沒有打開組群模式,都可隨時利用組群跳越功能。
• 做了步驟2操作之後,如果在5秒以內不實施任何操作時,組群跳越模式
即被抹去。要繼續進行程序時,便須從步驟 2 起再開始操作。
• 不具組群設定的光盤是不能利用組群跳越模式功能的。
B
其他操作
要知道樂曲名和播放時間
(見圖 F)
按遙控器上的 DISPLAY 。
每次按 DISPLAY ,顯示改變如下(見圖 F):
A
B
樂曲號
已播放時間
樂曲號
樂曲名
1)
組群中的總曲數
組群名
2)
總曲數
光盤名
1)
樂曲號
樂曲模式
3)
1)
只當MD有電子標籤時才出現。當沒錄曲名時將出現“
:”,當沒錄光
盤名時,則將出現“
:”。
2)
只在組群功能打開著時,才出現。
如果組群沒有名稱,將顯示組群號。
3)
每首樂曲的模式如下︰
“Mode ︰ SP”
標準模式(立體聲)
“Mode ︰ LP2”
2 ×模式(2 倍正常播放時間)
“Mode ︰ LP4”
4 ×模式(4 倍正常播放時間)
“Mode ︰ MONO”
單耳聲
要領
當在組群跳越模式中選擇組群時,即將出現組群名。詳細,請參看“使用組
群功能”中的“選擇及播放所要組群”。
模式指示只在播放中出現顯示。模式顯示2秒。然後即改變顯示現在播放中
曲子的已過時間。
SP 立體聲(正常) LP2 立體聲 LP4 立體聲
29
33
37
43
51
60
76
87
100
進行此項操作(使用遙控器時,頭戴耳機
耳機裡會聽到嘟嘟聲
1)
按遙控器上的 X(連續的短促嘟嘟聲)。
再次按遙控器上的 X ,恢復播放。
2)
將遙控器上的控制鈕轉向.(三聲短促
嘟聲)。(或按一次唱機上的 . 。)
將遙控器上的控制鈕反復轉向.(連續
三聲短促嘟聲)。(或反復按唱機上的
.
。)
將遙控器上的控制鈕轉向 N>(兩聲
短促嘟聲)。
按一次唱機上的 > N 。
將遙控器上的控制鈕轉向 . 並按住。
按住唱機上的 . 。
將遙控器上的控制鈕轉向 N > 並按
住。
按住唱機上的 > N 。
按 x ,然後按 OPEN 鈕。
3)
組群 1
組群 3
樂曲
樂曲
組群 2
樂曲
光盤
樂曲
光盤