Sony muteki lbt-zx99i User Manual

• Press FM MODE repeatedly until 

“MONO” disappears from the display.

• See general item “There is no sound.” 

(page 34) and check the condition of the 
system.

• Connect the component properly 

(page 11) while checking:
– if the cords are connected properly.
– if the cord plugs are firmly inserted all 

the way.

• Turn on the connected component.
• Refer to the operating instructions 

supplied with the connected component 
and start playing.

If the system still does not operate 
properly after performing the above 
measures or other troubles not described 
above occur, reset the system as follows:
Use the buttons on the unit for the 
operation.

Unplug the power cord.

Plug the power cord back in.

Press "/1 to turn on the system.

Press M (iPod), TUNING MODE 
and "/1 at the same time.
“COLD RESET” appears in the 
display.

The system is reset to the factory settings.  
You need to readjust all the settings you 
made, such as the preset stations, clock 
and timer.

One of the following messages may 
appear or flash in the display during 
operation.

There is no disc on the disc tray or you 
have loaded a disc that can not be played 
back on this system.

You have pressed a button those operation 
is not allowed or invalid at that time.

The on time and off time of Play Timer is 
the same.

PUSH SELECT!
You tried to set the clock or timer during 

timer operation.

You have pressed PLAY MODE during 
playback.

The system is reading information of the 
disc. Some buttons are not available.

You have cleared all the steps you 
programmed.

You have reached the end of the disc 
while pressing M during playback or 
pause.

You tried to program more than 25 steps.