Sony MZ-R55

Getting your PCLink going is as simple as plugging it into a primary 
USB port of any computer running Windows 98, Windows Me, 
Windows 2000, or MacOS 9.04. There is no need to load any special 
software, but you will have to follow a few simple steps. After you 
have finished these steps, make sure to read our tips on recording 
before launching into a full session.

Some computer systems ship with an OEM version of Windows 98 that does 
not contain the entire generic USB driver and audio platform. If you 
experience any trouble loading the USB drivers, please refer to the 
troubleshooting section at the end of this user manual for further instructions.

There is no need to turn your computer off when plugging the 
PCLink in for the first time. Locate your computer’s USB port 
and plug the supplied USB cable in. Now plug the PCLink into 
the other end of the USB cable.

Windows 98 will open an Add New Hardware Wizard and let 
you know it’s found the PCLink. It will then start loading drivers 
for a USB Composite Device, USB Human Interface Device, or 
USB Audio Device, depending on what components have 
previously been installed on your system. Click Next.

Check the option Search for the best driver for your 
device (Recommended) and click Next.