Sony network walkman nw-hd3 User Manual

Charge the  built-in lithium-ion rechargeable 
battery before using it for the fi rst time or 
when it is depleted.

The protection for the built-in 
rechargeable battery is released and power 
is supplied to the player. Keep the switch 
to ON position.

Connect the DC plug of the AC power 
adaptor to the DC IN jack of the USB 
adaptor, and then connect the AC plug to 
a wall outlet.





to an AC outlet

AC power 
adaptor

to DC IN 
jack

USB adaptor

Insert the USB adaptor as shown below 
until it clicks into place.
Charging of the battery starts. The CHG 
lamp lights up on the USB adaptor, and 
if the player is on, the battery indicator in 
the display changes.

USB adaptor connector

CHG 
lamp

USB adaptor

Charging is completed and the CHG lamp 
goes off in  approximately 3 hours*. The 
lightning mark lights up in the display if 
the player is on. 
To charge quickly, turn the display off and 
disconnect the USB cable from the USB 
adaptor, and then it takes approximately 1 
hour* to charge up to 80%.

* This is the approximate charging time for an 

empty battery charged under room temperature. 
When the display is on, it takes approximately 
5 hours to charge. The charging time will 
differ depending on the remaining power and 
battery condition. If the battery is charged in a 
low-temperature environment, the charging time 
will be longer.

 GB