Sony NW-E90 User Manual

Page of 88
NW-E50/E70/E90  GB/CS   3-267-071-13(1)
37-
GB
MP3 file manager software operation
What you can do
with the MP3 file
manager
You can transfer MP3 audio files easily, using the
MP3 file manager software, to your Network
Walkman in the same format (MP3), unlike the
SonicStage software, which converts MP3 audio
files into ATRAC3 or ATRAC3plus format.
The MP3 file manager software is pre-installed
on the Network Walkman at the factory;
thereby no installation is necessary.
However, be sure to install the
SonicStage software from the supplied
CD-ROM in your computer before using
the MP3 file manager software. The
computer will not recognize your
Network Walkman unless you install
the SonicStage software (in the
supplied CD-ROM) first.
 If you use a
computer that is not installed with the
SonicStage software, you need to install the
driver file for your Network Walkman from
the Sony customer service website (http://
www.css.ap.sony.com/).
System requirements
OS
: Windows XP Professional
Windows XP Home Edition
Windows 2000 Professional
(Simplified Chinese)
CPU
: Pentium II 400MHz or higher
RAM
: 64MB or more
HDD
: 5MB or more
Display
: 16bit color or higher,
 800 
×
 600 dots or better
USB port
 (Supports USB (Previously called
USB1.1))
MP3 file manager
software operation
continued
Transferring MP3
audio files from
the computer to
your Network
Walkman
1
Connect your Network Walkman to
your computer.
Connect the small connector of the supplied
dedicated USB cable into the USB jack on the
Network Walkman, then the large connector to a
USB port on your computer.
“CONNECT” appears in the display.
2
Click [My Computer]-[removable
disk:]* on your computer.
* [Memory Stick - MG] in the case of
Windows XP Professional/
Windows XP Home Edition
3
Click [Esys] folder to open in the
removable disk.
4
Double-click [MP3FileManager.exe] to
start it.
OPEN
OPEN
Dedicated USB cable (supplied)
to a USB port
to the USB jack
ACCESS
lamp