Sony PCGA-UVC11A User Manual

7

 GB

Before using the camera, you must install the required driver and software
on your computer using the supplied installation disc.

• Make sure that the optical drive (CD-ROM or DVD drive) is available for use on your

computer. In this document, the CD-ROM drive or other disk drive is referred to as “the
CD-ROM drive.” For details on how to connect an external CD-ROM drive, refer to the
manuals provided with your computer or the CD-ROM drive.

• Before connecting the camera to your computer, make sure that you install the driver

and the software as explained in this document.

• If the “Add New Hardware Wizard” dialog box appears, click “Cancel”, then

disconnect the camera from your computer and reinstall it.

• The preinstalled Wireless LAN driver for Sony VAIO computer models

PCG-SRX55TC/SRX55TH/SRX55TL/VX89/VX89P is incompatible when using the
PCGA-UVC11A USB camera.
For proper use, Sony recommends installing and using the Wireless LAN driver
supplied with the PCGA-UVC11A USB camera. Follow the instructions below. In the
U.S.A, for more information visit http://www.sony.com/pcsupport.

Install the PCGA-UVC11A device driver and the Network Smart Capture
software.

On a computer running the Windows 2000 operating system, log on as Administrator
before installing the driver and the software. On a computer running the Windows XP
operating system, log on as an administrator before installing the driver and the software.

Turn on the computer. The Windows operating system
starts. Close all other programs and insert the supplied
installation disc into the CD-ROM drive.

The installation program starts automatically and the “Sony Visual
Communication Camera PCGA-UVC11A Application Installer Setup”
screen appears.

Select your area from the list.