Sony pcv-rs104 User Manual
S
o
ny
V
A
IO Des
k
to
p Us
er Guide
Upgrading your VAIO computer
78
Adding / replacing a memory module
If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your
dealer.
dealer.
To add or change a memory module, proceed as follows:
1
Shut down the computer, unplug it, and remove any peripheral
devices.
devices.
2
Wait for the computer to cool down, then open the unit (see
Removing the cover
Removing the cover
3
Gently place the unit on its side.
4
To remove an existing memory module, release the end latches and
gently lift out the module, as shown.
gently lift out the module, as shown.
5
To insert a new memory module, remove it from its anti-static
package, handling it only by the edges.
package, handling it only by the edges.
6
Locate the notch on the bottom edge of the memory module.
7
Align the memory module over the slot, making sure the module is
facing the correct way.
facing the correct way.
8
Press evenly against the memory module's upper corners. The end
latches snap into position automatically.
latches snap into position automatically.
9
Reinstall any add-on cards or components you removed.
10
Replace the cover as described in Replacing the cover
.
✍
There is only one correct way to insert the memory module. Make sure the rivet of the module is
lined up with the connector.
lined up with the connector.
!
Use only PC2100 (DDR266) DDR-SDRAM DIMM modules.