Sony pcv-rx304 User Manual
Sony V
A
IO
Desktop User
Guide
Getting help
60
About the computer and software
My computer does not start
❑
Check that the computer is plugged into a power source and that it is turned on.
❑
Check that the power indicator on the front panel of the computer indicates that the power is on.
❑
Confirm that the power cord and all cables are connected firmly.
❑
If you have plugged the computer into an Uninterrupted Power Supply (UPS), make sure the UPS is
turned on and works.
turned on and works.
❑
Check that the monitor is properly connected to the main unit. Check that the brightness and contrast
controls are adjusted correctly.
controls are adjusted correctly.
❑
Moisture condensation may have occurred. Wait at least an hour before turning the computer on.
The message 'Press <F1> to continue, <F2> to enter setup' appears at startup
If the message Press <F1> to continue, <F2> to enter setup appears at the bottom of the display, you
need to initialize the BIOS.
need to initialize the BIOS.
To initialize the BIOS, proceed as follows:
1
Turn off the computer.
2
Remove any peripheral devices connected to the computer.
3
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
The BIOS setup menu screen appears.
4
Use the arrow keys to select the Exit menu.
5
Press <F9> or use the arrow keys to select Get Default Values. The message Load default
configuration now? appears.
configuration now? appears.
6
Make sure that Yes is selected and then press <Enter>.