Sony pcv-rx304 Software Guide
About the softwar
e
on yo
u
r Sony notebook
Managing drivers
81
Installing a driver
To install a driver, proceed as follows:
1
Insert the application CD-ROM into the CD-ROM drive (or the disk or the CD-ROM accompanying the
device you want to configure).
device you want to configure).
2
Connect the device that needs a driver, to your computer.
The Found New Hardware Wizard screen appears.
The Found New Hardware Wizard screen appears.
3
Select Specify a location, then click Next.
4
When installing a driver from the provided CD-ROM (or disk) by using a CD-ROM (or disk) drive
connected to the computer, select the Drivers folder on the CD-ROM (or disk) drive.
connected to the computer, select the Drivers folder on the CD-ROM (or disk) drive.
5
When installing a driver after having copied the contents of the provided CD-ROM (or disk) to your hard
disk, browse to the appropriate subdirectory containing the driver. The subdirectory should be found in
the folder you copied from the CD-ROM (or disk).
disk, browse to the appropriate subdirectory containing the driver. The subdirectory should be found in
the folder you copied from the CD-ROM (or disk).
6
Click OK to begin the search procedure.
7
Click Next to install the driver.
A new window appears when the driver has been installed.
A new window appears when the driver has been installed.
8
Click Finish.
You may be asked to restart your machine.
You may be asked to restart your machine.
9
Click Yes.
The driver is installed.
The driver is installed.
✍
To install your device driver, you must be logged on to your computer with an administrator account.