Sony pdw-v1 User Manual

Page of 101
2
 
To prevent fire or shock hazard, do not 
expose the unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified 
personnel only.
THIS APPARATUS MUST BE EARTHED.
CAUTION
The apparatus shall not be exposed to dripping or splashing 
and no objects filled with liquid, such as vases, shall be placed 
on the apparatus.
The unit is not disconnected from the AC power source 
(mains) as long as it is connected to the wall outlet, even if the 
unit itself has been turned off.
Do not install the appliance in a confined space, such as a 
book case or built-in cabinet.
This apparatus is provided with a main switch on the rear 
panel. Install this apparatus so that user can access the main 
switch easily.
WARNING: THIS WARNING IS APPLICABLE FOR USA 
ONLY.
If used in USA, use the UL LISTED power cord specified 
below.
DO NOT USE ANY OTHER POWER CORD.
Plug Cap
Parallel blade with ground pin 
(NEMA 5-15P Configuration)
Cord
Type SJT, three 16 or 18 AWG wires
Length
Minimum 1.5 m, Less than 2.5 m (8 ft 3 in)
Rating
Minimum 10 A, 125 V
Using this unit at a voltage other than 120 V may require the 
use of a different line cord or attachment plug, or both.  To 
reduce the risk of fire or electric shock, refer servicing to 
qualified service personnel.
WARNING: THIS WARNING IS APPLICABLE FOR OTHER 
COUNTRIES.
1. Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that 
conforms to the safety regulations of each country if 
applicable.
2. Use the Power Cord (3-core mains lead)/Appliance 
Connector/Plug conforming to the proper ratings (Voltage, 
Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please consult a qualified service 
personnel.
This Professional Disc Recorder is classified as a CLASS 1 
LASER PRODUCT.
Laser diode properties
Wavelength: 403 to 410 nm
Emission duration: Continuous
Laser output power: 65 mW (max. of pulse peak), 35 mW 
(max. of CW)
Tekniska data för laserdiod
Våglängd: 403 till 410 nm
Emissionslängd: Kontinuerlig
Laseruteffekt: 65 mW (max. för pulstopp), 35 mW (max. för 
kontinuerlig våg)
Spesifikasjoner laserdiode
Bølgelengde: 403 til 410 nm
Strålingens varighet: Kontinuerlig
Laserens effekt: 65 mW (maks stråletoppunkt), 35 mW 
(maks ved kontinuerlig stråling)
Laserdiodin ominaisuudet
Aallon pituus: 403 - 410 nm
Välityksen kesto: Jatkuva
Laserlähdön teho: 65 mW (sykehuipun maks.), 35 mW 
(jatkuvan aallon maks.)
This symbol is intended to alert the user to 
the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that 
may be of sufficient magnitude to constitute 
a risk of electric shock to persons.
This symbol is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.
WARNING