Sony PDW-D1 User Manual
33
3-3 Power Preparations
Cha
p
te
r 3
Pr
ep
ar
ar
a
tio
ns
ns
3-3 Power
Preparations
Preparations
This unit can be powered by a battery pack
or AC power.
or AC power.
3-3-1
Using AC Power
Connect a power cord (not supplied, see
page 58) to the AC power inlet connector
(page 28) on the rear panel of the unit.
page 58) to the AC power inlet connector
(page 28) on the rear panel of the unit.
3-3-2
Using a Battery
Pack
Usable battery packs
The battery packs usable with this unit are
as follows.
as follows.
BP-L60S, BP-GL65, BP-GL95, BP-
M100
M100
To use a battery pack, the optional BKP-
L551 battery adaptor is required.
L551 battery adaptor is required.
If the AC power supply and battery pack
DC power supply are both present
simultaneously, the unit operates from AC
power.
DC power supply are both present
simultaneously, the unit operates from AC
power.
To attach a battery pack
Refer also to the Installation Manual for the BKP-
L551 battery adaptor.
L551 battery adaptor.
Proceed as follows.
1
Using a Phillips screwdriver, remove
the screws from the battery adaptor
attachment section on the side panel of
this unit.
the screws from the battery adaptor
attachment section on the side panel of
this unit.
2
Take out the hexagonal wrench from
the back of the battery adaptor.
the back of the battery adaptor.
3
Using the hexagonal wrench, remove
the attachment and battery spacer
which are fixed to the back of the
battery adaptor.
the attachment and battery spacer
which are fixed to the back of the
battery adaptor.
4
Using the hexagonal wrench, screw the
battery adaptor to this unit, and
connect the DC power cord to the DC
power inlet connector on the rear panel
of this unit.
battery adaptor to this unit, and
connect the DC power cord to the DC
power inlet connector on the rear panel
of this unit.
Note