Sony PLM-S700 User Manual
15
-US
Getting Started
Connecting the Glasstron
When connecting the Glasstron to other equipment, use the supplied cables.
Note
If you use the commercially available cables, and the performance is reduced, check the performance
using the supplied cables.
using the supplied cables.
Connecting the PC
Be sure to turn off your PC before connecting the power supply box.
Notes
• Do not use the RGB signal cable (HD15), which is 6.5 feet (2m) or longer. The performance may be
reduced.
• Refer to the instruction manual supplied with your PC as well.
• Depending on your computer, the audio port is indicated as LINE OUT, headphone, speaker, etc.
• Adjust sound volume on the computer.
• Depending on your computer, the audio port is indicated as LINE OUT, headphone, speaker, etc.
• Adjust sound volume on the computer.
Connecting other IBM compatible PCs
Connect the Glasstron to your PC using the supplied RGB signal (HD15) cable. When you
connect the Glasstron to your PC, set the PC-VIDEO switch on the power supply box to “PC.”
connect the Glasstron to your PC, set the PC-VIDEO switch on the power supply box to “PC.”
continued
RGB
PC
AUDIO
to monitor port
to audio port
or
to monitor port
to audio port
: Signal flow
Audio cable (supplied)
RGB signal cable (supplied)
to PC AUDIO
connector
connector
to RGB connector
Power supply box
Set the PC-VIDEO switch
to “PC.”
to “PC.”