Sony PLM-S700 User Manual
18
-US
Connecting the Glasstron (continued)
AUDIO / VIDEO
Connecting the video equipment
Connect a VCR, laser disc player, DVD player, or camcorder to the power supply box using one
of the audio/video cables (supplied) as shown below. When you connect the Glasstron to the
video equipment, set the PC-VIDEO switch on the power supply box to “VIDEO.”
of the audio/video cables (supplied) as shown below. When you connect the Glasstron to the
video equipment, set the PC-VIDEO switch on the power supply box to “VIDEO.”
Note
Do not use the audio, audio/video or S-video connecting cables, which are 9.8 feet (3m) or longer. The
performance may be reduced.
performance may be reduced.
to AUDIO/VIDEO connector
VCR, laser disc player, DVD player,
camcorder, etc.
camcorder, etc.
to audio/video outputs
Audio/video cable (supplied)
(special miniplug ˜ special miniplug)
(special miniplug ˜ special miniplug)
to audio/video output
Camcorder, etc.
Audio/video cable (supplied)
(special miniplug ˜ phono plug)
(special miniplug ˜ phono plug)
Power supply box
Video (yellow)
Audio R (red)
Audio L (white)
Set the PC-VIDEO switch
to “VIDEO.”
to “VIDEO.”
: Signal flow