Sony PLM-S700 User Manual
30
-US
Using the Glasstron
You need to set a password the first time you use the Glasstron or after you reset the Glasstron.
Set the password following the procedure in “Setting the password” (pages 28 and 29).
Set the password following the procedure in “Setting the password” (pages 28 and 29).
Before you start…
Be sure to follow the procedures in “Connecting the Glasstron” (pages 15 to 20) and “Wearing
the Glasstron” (page 21).
Be sure to follow the procedures in “Connecting the Glasstron” (pages 15 to 20) and “Wearing
the Glasstron” (page 21).
1
Turn on the Glasstron using the POWER switch, then press PUSH
DISPLAY jog dial.
DISPLAY jog dial.
Change the display language before
pressing the jog dial, if necessary.
pressing the jog dial, if necessary.
If you have set the Glasstron to operate without a password, go to step 3.
2
Turn the PUSH DISPLAY jog dial to enter the first number of your
password, then press the jog dial. Enter the second and third
numbers in the same way.
password, then press the jog dial. Enter the second and third
numbers in the same way.
If you enter a wrong password, the
message shown on the right appears.
Enter the correct password.
message shown on the right appears.
Enter the correct password.
If you have entered a wrong password
more than five times, after about ten
seconds, the Glasstron turns off
automatically.
more than five times, after about ten
seconds, the Glasstron turns off
automatically.
Screen
Entered password
ON / OFF
POWER / POWER SAVING
PUSH DISPLAY
INCORRECT PASSWORD.
SEE THE USER’S MANUAL.
SEE THE USER’S MANUAL.
ENTER THE THIRD NUMBER
OF YOUR PASSWORD.
OF YOUR PASSWORD.
EXEC
SEL
123
INCORRECT PASSWORD.
ENTER THE FIRST NUMBER
AGAIN.
ENTER THE FIRST NUMBER
AGAIN.
EXEC
SEL
1
DISPLAY LANGUAGE
ENGLISH
FRANÇAIS
FRANÇAIS
EXEC
SEL