Sony PLM-S700 User Manual

43

-US

• Operate the product only with the

supplied AC power adapter.  If you use a
different AC power adapter, it may cause
a malfunction.

• Should any liquid or solid object fall into

the cabinet, unplug the product and have
it checked by qualified personnel before
operating it further.

• Always turn the product off when you do

not use it.
Unplug the product from the wall outlet if
you are not going to use it for several days
or more.  To disconnect the cord, pull it
out by the plug.  Never pull the cord itself.

• Do not overload wall outlet, extension

cords, or convenience receptacles beyond
their capacity, since this can result in fire
or electric shock.

• Do not use attachments not recommended

by the manufacturer, as they may cause
hazards.

• Avoid using earphones at high volume.

Hearing experts advise against
continuous, loud, and extended play.  If
you experience a ringing in your ears,
reduce volume or discontinue use.

• Do not touch the AC power adapter or

power supply box with wet hands.  If you
fail to observe this, it may cause electric
shock.

• Do not drop or give a mechanical shock to

the product.

• To prevent internal heat build-up, do not

block the ventilation openings.

• Avoid operating the product at

temperatures below 41˚F (5˚C).

• Do not subject the product to high

temperature or direct sunlight.  If you do
not observe the above instructions, the
product may become deformed and the
screens may become impossible to align.
If you keep watching misaligned screens,
you may develop eye fatigue.  Follow the
instructions in “Checking the screen
position alignment” on page 25, to be
sure the screens are aligned.  If you find
the screens misaligned, have the product
repaired at your Sony dealer or local
authorized Sony service facility.

• Do not place the product in locations

where it is wet, humid, dusty, smoky, or
steamy.  Do not use this product near or
around water.  It may cause fire or
electric shock.  Especially, do not use the
product in the bathroom.

• If the product is transported directly from

a cold to a warm location, or if the room
temperature has changed suddenly, the
picture may be blurred or show poor
color.  This is because moisture has
condensed on the mirror or lenses inside.
If this happens, let the moisture
evaporate before using the product.

• Do not place the product on an unstable

cart, stand, table, or shelf.  The product
may fall, causing serious injury to a child
or an adult, and serious damage to the
product.

• Do not allow anything to rest on or roll

over the power cord, and do not place the
product where the power cord is subject
to wear or abuse.