Sony pfm-42b2e User Manual

24

 (GB)

Watching the Picture

INPUT2 YUV: Selects the audio and video signal

input from the INPUT2 connectors when
the input signal is a component signal.

VIDEO COMPOSITE: Selects the audio and

video signal input from the COMPOSITE
IN connector and AUDIO IN jack among
the VIDEO connectors.

VIDEO Y/C: Selects the audio and video signal

input from the Y/C IN connector and
AUDIO IN jack among the VIDEO
connectors.

(For the PFM-42B1E/42B2E, VIDEO
COMPOSITE and VIDEO Y/C only appear when
the BKM-B10 video input adaptor or BKM-B13
video input & control S adaptor (not supplied) is
installed.)

INPUT3 RGB: Selects the input signal (RGB

signal) from the device connected to the
INPUT 3 connector. (Only when the
BKM-B12 component adaptor is
installed.)

INPUT3 YUV: Selects the input signal

(Component signal) from the device
connected to the INPUT3 connector.
(Only when the BKM-B12 component
adaptor is installed.)

INPUT3 PC: Selects the signal from the BKM-

B30NW network adaptor installed in the
VIDEO connector unit.
(Only when the BKM-B30NW network
adaptor is installed.)

The selected input signal appears on the display
panel.

P A L
V I D E O

C O M P O S I T E

You can also switch the input signal using the
Remote Commander.

We recommend input source video equipment
equipped with a TBC (time base corrector). If the
display receives a signal without TBC, the picture
may disappear due to disturbance of the sync signal.

Color system or horizontal/vertical frequency

Signal type

• Turn on the display.
• Turn on the connected equipment and play a video

source.

• To display the input signal information on the screen

when turning on the power or switching the input
signal, set “DISPLAY” in the CONFIG (1/2) menu
to ON.

• To select the on-screen language used in the menu,

see page 36 (GB).

Press MENU.
The main menu appears on the display panel.

ENTER

MENU

M A I N

M E N U

I N P U T

S E L E C T

P I C

C O N T R O L

P I C

S I Z E

C O N F I G

M E M O R Y

R E M O T E
S T A T U S

S E L E C T

S E T

E N D

Press v / V to move the cursor (B) to “INPUT
SELECT” and press ENTER.
The currently selected input signal and INPUT
SELECT menu appear on the display panel.

ENTER

MENU

P A L
V I D E O

C O M P O S I T E

I N P U T

S E L E C T

I N P U T 1

R G B

I N P U T 1

Y U V

I N P U T 2

R G B

I N P U T 2

Y U V

V I D E O

C O M P O S I T E

V I D E O

Y / C

S E L E C T

S E T

E N D

Press v / V to move the cursor (B) to the input
source to be displayed and press ENTER.
INPUT1 RGB: Selects the audio and video signal

input from the INPUT1 connectors when
the input signal is an RGB signal.

INPUT1 YUV: Selects the audio and video signal

input from the INPUT1 connectors when
the input signal is a component signal.

INPUT2 RGB: Selects the audio and video signal

input from the INPUT2 connectors when
the input signal is an RGB signal.