Sony RCD-W2000ES User Manual
19
Basic Operations
Creating Your Own
Program (Program Play)
Program (Program Play)
You can specify the playback order of the
tracks and MP3 files on a disc to create your
own programs containing up to 25 steps.
tracks and MP3 files on a disc to create your
own programs containing up to 25 steps.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A, or to DECK B
to operate DECK B.
to DECK A to operate DECK A, or to DECK B
to operate DECK B.
1
While the unit is stopped, press PLAY
MODE repeatedly until “PGM” lights up
in the display.
MODE repeatedly until “PGM” lights up
in the display.
2
For DECK A, press one of the DISC 1-5
buttons (or DISC SKIP on the remote)
to select the desired disc number.
buttons (or DISC SKIP on the remote)
to select the desired disc number.
3
Turn AMS (or press
./>
on the
remote) to select the desired track
number, then press AMS (or PLAY
MODE).
number, then press AMS (or PLAY
MODE).
To program MP3 files, press ALBUM until
ALBUM SELECT indicator in the display
lights up, then turn AMS (or press ALBUM
+/– on the remote) to select the desired
album title.
ALBUM SELECT indicator in the display
lights up, then turn AMS (or press ALBUM
+/– on the remote) to select the desired
album title.
Press ALBUM until ALBUM SELECT
indicator in the display turns off, turn AMS
(or press ./> on the remote) to select
the desired track number, then press AMS
(or PLAY MODE).
indicator in the display turns off, turn AMS
(or press ./> on the remote) to select
the desired track number, then press AMS
(or PLAY MODE).
4
To program additional tracks, repeat
step 3 (steps 2 to 3 for DECK A).
step 3 (steps 2 to 3 for DECK A).
5
Press
N
(or
H
on the remote) to start
Program Play.
The unit starts playing tracks in the
programmed order.
programmed order.
To program all tracks on the
selected disc or album (DECK A
only)
After displaying the first track number in step
3, turn AMS counterclockwise (or press .
on the remote) to select “AL” instead of a track
number. (You cannot program all tracks on the
disc for MP3 files.)
3, turn AMS counterclockwise (or press .
on the remote) to select “AL” instead of a track
number. (You cannot program all tracks on the
disc for MP3 files.)
To stop Program Play
Press x.
To cancel Program Play
While the unit is stopped, press PLAY MODE
repeatedly until “PGM” goes off.
repeatedly until “PGM” goes off.
To erase the last programmed track
While the unit is stopped, press CLEAR. (Press
CLEAR on the remote for DECK A.) Each
time you press the button, the last programmed
track is erased.
CLEAR on the remote for DECK A.) Each
time you press the button, the last programmed
track is erased.
Tips
• You can also select the track number using the
number buttons on the remote in step 3 above.
• The program remains even after Program Play ends.
When you press N (or H on the remote), you can
play the same program again.
play the same program again.
• To check the total number of the programmed
tracks, press TIME while the unit is stopped.
Notes
• You cannot create a program containing tracks from
both DECK A and DECK B.
• “Step Full!” appears in the display when you
program over 25 steps. Erase the unnecessary tracks
to enter other tracks.
to enter other tracks.
• The program is erased when you turn the unit off.
• If the total time of the program exceeds 99 minutes
• If the total time of the program exceeds 99 minutes
59 seconds, “--.--” appears in the display.
• You cannot change the PLAY MODE during
playback.
• If you program an MP3 track, “--.--” appears in the
display. (The total playing time does not appear for
MP3 files.)
MP3 files.)
AMS
PLAY MODE
AMS
PLAY MODE
x
x
N
N
CLEAR
ALBUM
PLAY MODE
CLEAR
DISC SKIP
x
.
/
>
H
DECK A/DECK B
ALBUM +/–
DISC 1-5
A