Sony rdr-hxd910 User Manual

Page of 124
86
Recording an Entire DV 
Format Tape (One Touch 
Dubbing)
You can record the entire contents of a DV/
Digital 8 format tape onto a disc with a single 
press of the ONE-TOUCH DUB button on the 
recorder. The recorder controls the digital video 
camera for the whole process, and completes the 
recording.
How chapters are created
The contents dubbed to the HDD or DVD become 
a single title. When “Auto Chapter” of “Features” 
setup is set to “On,” this title is divided into 
chapters. When dubbing to the HDD or a DVD-
RW (VR mode), each shooting session on the tape 
becomes a chapter on the disc. For other discs, the 
recorder divides the title into chapters at 
approximately 6-minute intervals.
Follow steps 1 to 5 of “Preparing for DV 
dubbing” on page 84
, and press ONE-TOUCH 
DUB on the recorder.
The recorder rewinds the tape and then starts 
recording the tape contents.
When the recording is finished, the recorder 
rewinds the tape in the digital video camera.
To stop during recording 
Open the remote’s cover and press x REC STOP. 
Note that it may take a few seconds for the 
recorder to stop recording.
z
Hints
• If you set “Finalise Disc” of “One Touch Dubbing” to 
“Auto” in “Features” setup (page 100), the recorded 
disc (except DVD-RW (VR mode)) will automatically 
be finalised after recording is finished.
• You can play back a previously recorded title on the 
HDD while One Touch Dubbing is in progress.
b
Notes
• When a blank space between the recordings on the tape 
continues for more than five minutes, One Touch 
Dubbing ends automatically.
• The recorder records a blank for five minutes before it 
stops dubbing. To stop the blank recording, press 
x REC STOP.
Program Edit
You can select scenes from a DV/Digital 8 format 
tape, and then automatically record selected 
scenes to the HDD or a DVD.
To use this function, you will do the following:
m
Using the recorder’s remote control, fast forward 
or rewind the tape to select the scenes. At this 
point, the selected scenes are not copied to the 
disc. The recorder only remembers the IN and 
OUT points of the scenes that you selected for 
dubbing. You can also reset, erase, or change the 
order of the scenes.
m
After you have selected the scenes, the recorder 
will fast forward and rewind the tape 
automatically and record the scenes to the HDD or 
a DVD.
How chapters are created
The contents dubbed to the HDD or DVD become 
a single title. When “Auto Chapter” of “Features” 
setup is set to “On,” this title is divided into 
chapters. When dubbing to the HDD or a DVD-
RW (VR mode), each shooting session on the tape 
becomes a chapter on the disc. For other discs, the 
recorder divides the title into chapters at 
approximately 6-minute intervals.
1
Follow steps 1 to 5 of “Preparing for DV 
dubbing” on page 84
, and press SYSTEM 
MENU.
-RW
VR
-RW
Video
+
RW
-
R
+
R
HDD
Connect your digital video camera and 
prepare for recording
Select and edit the scenes you want to dub
Dub the selected scenes
-RW
VR
-RW
Video
+
RW
-
R
+
R
HDD