Sony rdr-vx500 User Manual

Page of 128
113
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
Notes About This Recorder
On operation
• If the recorder is brought directly from a cold to 
a warm location, or is placed in a very damp 
room, moisture may condense on the lenses 
inside the recorder. Should this occur, the 
recorder may not operate properly. In this case, 
remove the disc and leave the recorder turned on 
for about half an hour until the moisture 
evaporates.
• When you move the recorder, take out any discs. 
If you don’t, the disc may be damaged.
On adjusting volume
Do not turn up the volume while listening to a 
section with very low level inputs or no audio 
signals. If you do, the speakers may be damaged 
when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft 
cloth slightly moistened with a mild detergent 
solution. Do not use any type of abrasive pad, 
scouring powder or solvent such as alcohol or 
benzine.
On cleaning discs
Do not use a commercially available cleaning 
disc. It may cause a malfunction.
Notes about the discs
• To keep the disc clean, handle the disc by its 
edge. Do not touch the surface. Dust, 
fingerprints, or scratches on the disc may cause 
it to malfunction.
• Do not expose the disc to direct sunlight or heat 
sources such as hot air ducts, or leave it in a car 
parked in direct sunlight as the temperature may 
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the 
disc from the center out.
• Do not use solvents such as benzine, thinner, 
commercially available cleaners, or anti-static 
spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g., 
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker 
adhesive on it.
On cleaning the VCR mechanism
Clean the cabinet, panel, and controls with a dry, 
soft cloth, or a soft cloth slightly moistened with a 
mild detergent solution. Do not use any type of 
solvent, such as alcohol or benzine.
Symptoms caused by contaminated video 
heads
initial 
contamination
terminal