Sony RDR-GX310 User Manual
66
Program Edit
You can select scenes from a DV/Digital8 format
tape, and then automatically record selected
scenes to a DVD.
tape, and then automatically record selected
scenes to a DVD.
To use this function, you will do the following:
m
Using the recorder’s remote control, fast forward
or rewind the tape to select the scenes. At this
point, the selected scenes are not copied to the
disc. The recorder only remembers the IN and
OUT points of the scenes that you selected for
dubbing. You can also reset, erase, or change the
order of the scenes.
m
or rewind the tape to select the scenes. At this
point, the selected scenes are not copied to the
disc. The recorder only remembers the IN and
OUT points of the scenes that you selected for
dubbing. You can also reset, erase, or change the
order of the scenes.
m
After you have selected the scenes, the recorder
will fast forward and rewind the tape
automatically and record the scenes to a DVD.
will fast forward and rewind the tape
automatically and record the scenes to a DVD.
How chapters are created
The contents dubbed to DVD become a single
title. When “Auto Chapter” of “Features” setup is
set to “On,” this title is divided into chapters.
When dubbing to a DVD-RW (VR mode), each
shooting session on the tape becomes a chapter on
the disc. For other discs, the recorder divides the
title into chapters at approximately 6-minute
intervals.
title. When “Auto Chapter” of “Features” setup is
set to “On,” this title is divided into chapters.
When dubbing to a DVD-RW (VR mode), each
shooting session on the tape becomes a chapter on
the disc. For other discs, the recorder divides the
title into chapters at approximately 6-minute
intervals.
1
Follow steps 1 to 5 of “Preparing for DV
dubbing” on page 64, and press SYSTEM
MENU.
dubbing” on page 64, and press SYSTEM
MENU.
2
Select “DV EDIT,” and press ENTER.
The display asks if you want to start selecting
scenes.
scenes.
• If you have previously saved a programme,
the display asks if you want to edit an
existing programme or to create a new
programme. To resume editing the existing
programme, select “Saved Data,” and go to
step 6.
existing programme or to create a new
programme. To resume editing the existing
programme, select “Saved Data,” and go to
step 6.
3
Select “Start,” and press ENTER.
The display for setting the IN point (start of
the scene) appears.
The scene starts to play in the background.
the scene) appears.
The scene starts to play in the background.
4
Select the IN point by pressing
m/M,
and press ENTER.
The display for setting the OUT point (end of
the scene) appears. The scene starts to play in
the background from the IN point.
the scene) appears. The scene starts to play in
the background from the IN point.
5
Select the OUT point by pressing
m/M,
and press ENTER.
The display asks if you want to add the
selected scene to the Scene List menu.
To preview the scene, select “Preview.”
To reset either the IN or OUT point, select
“Change IN” or “Change OUT,” and repeat
from step 4.
selected scene to the Scene List menu.
To preview the scene, select “Preview.”
To reset either the IN or OUT point, select
“Change IN” or “Change OUT,” and repeat
from step 4.
Connect your digital video camera and
prepare for recording
prepare for recording
Select and edit the scenes you want to dub
Dub the selected scenes
-RW
VR
-RW
Video
+
RW
-
R
+
R
Scenes Selection
Do you want to select a scene?
Start
Cancel
Select scene(Set IN point)
Controlling...
Scenes Selection
OK
Cancel
Preview
Change IN
Change OUT
Do you want to capture the scene
0:00:30
between IN
and OUT 0:00:52?